dts/allwinner/sun50i-h6-orangepi.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 /dts-v1/;
7 #include "sun50i-h6.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
13 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
20 		stdout-path = "serial0:115200n8";
24 		compatible = "hdmi-connector";
26 		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
30 				remote-endpoint = <&hdmi_out_con>;
35 	ext_osc32k: ext-osc32k-clk {
36 		#clock-cells = <0>;
37 		compatible = "fixed-clock";
38 		clock-frequency = <32768>;
39 		clock-output-names = "ext_osc32k";
43 		compatible = "gpio-leds";
45 		led-0 {
47 			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
48 			default-state = "on";
51 		led-1 {
53 			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
59 		compatible = "regulator-fixed";
60 		regulator-name = "vcc-5v";
61 		regulator-min-microvolt = <5000000>;
62 		regulator-max-microvolt = <5000000>;
63 		regulator-always-on;
80 	mali-supply = <&reg_dcdcc>;
90 		remote-endpoint = <&hdmi_con_in>;
95 	vmmc-supply = <&reg_cldo1>;
96 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
97 	bus-width = <4>;
110 	vcc-pc-supply = <&reg_bldo2>;
111 	vcc-pd-supply = <&reg_cldo1>;
112 	vcc-pg-supply = <&reg_aldo1>;
120 	vcc-pm-supply = <&reg_bldo3>;
127 		compatible = "x-powers,axp805", "x-powers,axp806";
129 		interrupt-parent = <&r_intc>;
131 		interrupt-controller;
132 		#interrupt-cells = <1>;
133 		x-powers,self-working-mode;
134 		vina-supply = <&reg_vcc5v>;
135 		vinb-supply = <&reg_vcc5v>;
136 		vinc-supply = <&reg_vcc5v>;
137 		vind-supply = <&reg_vcc5v>;
138 		vine-supply = <&reg_vcc5v>;
139 		aldoin-supply = <&reg_vcc5v>;
140 		bldoin-supply = <&reg_vcc5v>;
141 		cldoin-supply = <&reg_vcc5v>;
145 				regulator-always-on;
146 				regulator-min-microvolt = <3300000>;
147 				regulator-max-microvolt = <3300000>;
148 				regulator-name = "vcc-pl";
152 				regulator-min-microvolt = <3300000>;
153 				regulator-max-microvolt = <3300000>;
154 				regulator-name = "vcc-ac200";
158 				regulator-always-on;
159 				regulator-min-microvolt = <3300000>;
160 				regulator-max-microvolt = <3300000>;
161 				regulator-name = "vcc25-dram";
165 				regulator-always-on;
166 				regulator-min-microvolt = <1800000>;
167 				regulator-max-microvolt = <1800000>;
168 				regulator-name = "vcc-bias-pll";
172 				regulator-always-on;
173 				regulator-min-microvolt = <1800000>;
174 				regulator-max-microvolt = <1800000>;
175 				regulator-name = "vcc-efuse-pcie-hdmi-io";
179 				regulator-always-on;
180 				regulator-min-microvolt = <1800000>;
181 				regulator-max-microvolt = <1800000>;
182 				regulator-name = "vcc-dcxoio";
190 				regulator-always-on;
191 				regulator-min-microvolt = <3300000>;
192 				regulator-max-microvolt = <3300000>;
193 				regulator-name = "vcc-3v3";
197 				regulator-min-microvolt = <3300000>;
198 				regulator-max-microvolt = <3300000>;
199 				regulator-name = "vcc-wifi-1";
203 				regulator-min-microvolt = <3300000>;
204 				regulator-max-microvolt = <3300000>;
205 				regulator-name = "vcc-wifi-2";
209 				regulator-always-on;
210 				regulator-min-microvolt = <810000>;
211 				regulator-max-microvolt = <1080000>;
212 				regulator-name = "vdd-cpu";
216 				regulator-enable-ramp-delay = <32000>;
217 				regulator-min-microvolt = <810000>;
218 				regulator-max-microvolt = <1080000>;
219 				regulator-name = "vdd-gpu";
223 				regulator-always-on;
224 				regulator-min-microvolt = <960000>;
225 				regulator-max-microvolt = <960000>;
226 				regulator-name = "vdd-sys";
230 				regulator-always-on;
231 				regulator-min-microvolt = <1200000>;
232 				regulator-max-microvolt = <1200000>;
233 				regulator-name = "vcc-dram";
248 	pinctrl-names = "default";
249 	pinctrl-0 = <&uart0_ph_pins>;
264 	usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
265 	usb0_vbus-supply = <&reg_vcc5v>;
266 	usb3_vbus-supply = <&reg_vcc5v>;