Lines Matching +full:usb0_vbus +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 /dts-v1/;
5 #include "sun50i-h5.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
11 compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
19 stdout-path = "serial0:115200n8";
23 compatible = "gpio-leds";
25 led-0 {
28 default-state = "on";
31 led-1 {
37 reg_gmac_3v3: gmac-3v3 {
38 compatible = "regulator-fixed";
39 regulator-name = "gmac-3v3";
40 regulator-min-microvolt = <3300000>;
41 regulator-max-microvolt = <3300000>;
42 startup-delay-us = <100000>;
43 enable-active-high;
48 compatible = "regulator-fixed";
49 regulator-name = "vcc3v3";
50 regulator-min-microvolt = <3300000>;
51 regulator-max-microvolt = <3300000>;
54 reg_usb0_vbus: usb0-vbus {
55 compatible = "regulator-fixed";
56 regulator-name = "usb0-vbus";
57 regulator-min-microvolt = <5000000>;
58 regulator-max-microvolt = <5000000>;
59 enable-active-high;
74 pinctrl-names = "default";
75 pinctrl-0 = <&emac_rgmii_pins>;
76 phy-supply = <®_gmac_3v3>;
77 phy-handle = <&ext_rgmii_phy>;
78 phy-mode = "rgmii-id";
83 ext_rgmii_phy: ethernet-phy@7 {
84 compatible = "ethernet-phy-ieee802.3-c22";
90 vmmc-supply = <®_vcc3v3>;
91 bus-width = <4>;
92 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
105 pinctrl-names = "default";
106 pinctrl-0 = <&uart0_pa_pins>;
116 /* USB Type-A port's VBUS is always on */
117 usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
118 usb0_vbus-supply = <®_usb0_vbus>;