ti/omap/omap4-sdp.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
9 #include "omap4-mcpdm.dtsi"
13 	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
26 	vdd_eth: fixedregulator-vdd-eth {
27 		pinctrl-names = "default";
28 		pinctrl-0 = <&enet_enable_gpio>;
30 		compatible = "regulator-fixed";
31 		regulator-name = "VDD_ETH";
32 		regulator-min-microvolt = <3300000>;
33 		regulator-max-microvolt = <3300000>;
35 		enable-active-high;
36 		regulator-boot-on;
37 		startup-delay-us = <25000>;
40 	vbat: fixedregulator-vbat {
41 		compatible = "regulator-fixed";
42 		regulator-name = "VBAT";
43 		regulator-min-microvolt = <3750000>;
44 		regulator-max-microvolt = <3750000>;
45 		regulator-boot-on;
48 	led-controller-1 {
49 		compatible = "gpio-leds";
51 		led-1 {
56 		led-2 {
61 		led-3 {
66 		led-4 {
71 		led-5 {
76 		led-6 {
81 		led-7 {
86 		led-8 {
92 	led-controller-2 {
93 		compatible = "pwm-leds";
95 		led-9 {
98 			max-brightness = <127>;
101 		led-10 {
104 			max-brightness = <255>;
109 		compatible = "pwm-backlight";
111 		brightness-levels = <
116 		default-brightness-level = <13>;
120 		compatible = "ti,abe-twl6040";
123 		ti,jack-detection = <1>;
124 		ti,mclk-freq = <38400000>;
132 		ti,audio-routing =
142 			"HSMIC", "Headset Mic",
143 			"Headset Mic", "Headset Mic Bias",
144 			"MAINMIC", "Main Handset Mic",
145 			"Main Handset Mic", "Main Mic Bias",
146 			"SUBMIC", "Sub Handset Mic",
147 			"Sub Handset Mic", "Main Mic Bias",
150 			"DMic", "Digital Mic",
151 			"Digital Mic", "Digital Mic1 Bias";
156 		pinctrl-names = "default";
157 		pinctrl-0 = <&wl12xx_gpio>;
158 		compatible = "regulator-fixed";
159 		regulator-name = "vwl1271";
160 		regulator-min-microvolt = <1800000>;
161 		regulator-max-microvolt = <1800000>;
163 		startup-delay-us = <70000>;
164 		enable-active-high;
175 			#address-cells = <1>;
176 			#size-cells = <0>;
182 					remote-endpoint = <&hdmi_out>;
190 					remote-endpoint = <&hdmi_connector_in>;
197 		compatible = "hdmi-connector";
204 				remote-endpoint = <&tpd12s015_out>;
211 	pinctrl-names = "default";
212 	pinctrl-0 = <
217 	uart2_pins: uart2-pins {
218 		pinctrl-single,pins = <
226 	uart3_pins: uart3-pins {
227 		pinctrl-single,pins = <
235 	uart4_pins: uart4-pins {
236 		pinctrl-single,pins = <
242 	twl6040_pins: twl6040-pins {
243 		pinctrl-single,pins = <
249 	dmic_pins: dmic-pins {
250 		pinctrl-single,pins = <
258 	mcbsp1_pins: mcbsp1-pins {
259 		pinctrl-single,pins = <
267 	mcbsp2_pins: mcbsp2-pins {
268 		pinctrl-single,pins = <
276 	mcspi1_pins: mcspi1-pins {
277 		pinctrl-single,pins = <
285 	dss_hdmi_pins: dss-hdmi-pins {
286 		pinctrl-single,pins = <
293 	tpd12s015_pins: tpd12s015-pins {
294 		pinctrl-single,pins = <
301 	i2c1_pins: i2c1-pins {
302 		pinctrl-single,pins = <
308 	i2c2_pins: i2c2-pins {
309 		pinctrl-single,pins = <
315 	i2c3_pins: i2c3-pins {
316 		pinctrl-single,pins = <
322 	i2c4_pins: i2c4-pins {
323 		pinctrl-single,pins = <
330 	wl12xx_gpio: wl12xx-gpio-pins {
331 		pinctrl-single,pins = <
337 	wl12xx_pins: wl12xx-pins {
338 		pinctrl-single,pins = <
350 	enet_enable_gpio: enet-enable-gpio-pins {
351 		pinctrl-single,pins = <
356 	ks8851_pins: ks8851-pins {
357 		pinctrl-single,pins = <
365 			 * We could use gpio-hog to keep it high, but let's use
374 	pinctrl-names = "default";
375 	pinctrl-0 = <&i2c1_pins>;
377 	clock-frequency = <400000>;
381 		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
387 		#clock-cells = <0>;
390 		pinctrl-names = "default";
391 		pinctrl-0 = <&twl6040_pins>;
393 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
395 		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
397 		vio-supply = <&v1v8>;
398 		v2v1-supply = <&v2v1>;
399 		enable-active-high;
402 		vddvibl-supply = <&vbat>;
403 		vddvibr-supply = <&vbat>;
407 			ti,vibldrv-res = <8>;
408 			ti,vibrdrv-res = <3>;
409 			ti,viblmotor-res = <10>;
410 			ti,vibrmotor-res = <10>;
419 	pinctrl-names = "default";
420 	pinctrl-0 = <&i2c2_pins>;
422 	clock-frequency = <400000>;
426 	pinctrl-names = "default";
427 	pinctrl-0 = <&i2c3_pins>;
429 	clock-frequency = <400000>;
442 	 * https://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf (defunct)
451 	pinctrl-names = "default";
452 	pinctrl-0 = <&i2c4_pins>;
454 	clock-frequency = <400000>;
457 	 * 3-Axis Digital Compass
467 	pinctrl-names = "default";
468 	pinctrl-0 = <&mcspi1_pins>;
471 		pinctrl-names = "default";
472 		pinctrl-0 = <&ks8851_pins>;
475 		spi-max-frequency = <24000000>;
477 		interrupt-parent = <&gpio2>;
479 		vdd-supply = <&vdd_eth>;
480 		reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
485 	vmmc-supply = <&vmmc>;
486 	bus-width = <8>;
490 	vmmc-supply = <&vaux1>;
491 	bus-width = <8>;
492 	ti,non-removable;
504 	pinctrl-names = "default";
505 	pinctrl-0 = <&wl12xx_pins>;
506 	vmmc-supply = <&wl12xx_vmmc>;
507 	non-removable;
508 	bus-width = <4>;
509 	cap-power-off-card;
511 	#address-cells = <1>;
512 	#size-cells = <0>;
516 		interrupt-parent = <&gpio1>;
518 		ref-clock-frequency = <26000000>;
519 		tcxo-clock-frequency = <26000000>;
524 	cs1-used;
525 	device-handle = <&elpida_ECB240ABACN>;
529 	cs1-used;
530 	device-handle = <&elpida_ECB240ABACN>;
534 	keypad,num-rows = <8>;
535 	keypad,num-columns = <8>;
600 	linux,input-no-autorepeat;
604 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
606 	pinctrl-names = "default";
607 	pinctrl-0 = <&uart2_pins>;
611 	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
613 	pinctrl-names = "default";
614 	pinctrl-0 = <&uart3_pins>;
618 	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
620 	pinctrl-names = "default";
621 	pinctrl-0 = <&uart4_pins>;
625 	pinctrl-names = "default";
626 	pinctrl-0 = <&mcbsp1_pins>;
631 	pinctrl-names = "default";
632 	pinctrl-0 = <&mcbsp2_pins>;
637 	pinctrl-names = "default";
638 	pinctrl-0 = <&dmic_pins>;
643 	usb-supply = <&vusb>;
647 	interface-type = <1>;
658 	vdd-supply = <&vcxio>;
662 			remote-endpoint = <&lcd0_in>;
668 		compatible = "tpo,taal", "panel-dsi-cm";
672 		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
676 				remote-endpoint = <&dsi1_out_ep>;
684 	vdd-supply = <&vcxio>;
688 			remote-endpoint = <&lcd1_in>;
694 		compatible = "tpo,taal", "panel-dsi-cm";
698 		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
702 				remote-endpoint = <&dsi2_out_ep>;
710 	vdda-supply = <&vdac>;
714 			remote-endpoint = <&tpd12s015_in>;