ti/omap/omap3-zoom3.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include "omap-zoom-common.dtsi"
12 	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3";
16 			cpu0-supply = <&vcc>;
25 	vddvario: regulator-vddvario {  label
26 		compatible = "regulator-fixed";
27 		regulator-name = "vddvario";
28 		regulator-always-on;
31 	vdd33a: regulator-vdd33a {
32 		compatible = "regulator-fixed";
33 		regulator-name = "vdd33a";
34 		regulator-always-on;
38 		pinctrl-names = "default";
39 		pinctrl-0 = <&wl12xx_gpio>;
40 		compatible = "regulator-fixed";
41 		regulator-name = "vwl1271";
42 		regulator-min-microvolt = <1800000>;
43 		regulator-max-microvolt = <1800000>;
45 		startup-delay-us = <70000>;
46 		enable-active-high;
52 	mmc1_pins: mmc1-pins {
53 		pinctrl-single,pins = <
63 	mmc2_pins: mmc2-pins {
64 		pinctrl-single,pins = <
78 	mmc3_pins: mmc3-pins {
79 		pinctrl-single,pins = <
85 	uart1_pins: uart1-pins {
86 		pinctrl-single,pins = <
94 	uart2_pins: uart2-pins {
95 		pinctrl-single,pins = <
103 	uart3_pins: uart3-pins {
104 		pinctrl-single,pins = <
113 	wl12xx_gpio: wl12xx-gpio-pins {
114 		pinctrl-single,pins = <
121 	mmc3_2_pins: mmc3-2-pins {
122 		pinctrl-single,pins = <
133 	wlan_host_wkup: wlan-host-wkup-pins {
134 		pinctrl-single,pins = <
141 	clock-frequency = <2600000>;
146 		interrupt-parent = <&intc>;
153 	clock-frequency = <400000>;
157 	clock-frequency = <400000>;
160 	 * TVP5146 Video decoder-in for analog input support.
169 	ti,use-leds;
173 	vmmc-supply = <&vmmc1>;
174 	vqmmc-supply = <&vsim>;
175 	bus-width = <4>;
176 	pinctrl-names = "default";
177 	pinctrl-0 = <&mmc1_pins>;
181 	vmmc-supply = <&vmmc2>;
182 	ti,non-removable;
183 	bus-width = <8>;
184 	pinctrl-names = "default";
185 	pinctrl-0 = <&mmc2_pins>;
189 	vmmc-supply = <&wl12xx_vmmc>;
190 	non-removable;
191 	bus-width = <4>;
192 	cap-power-off-card;
193 	pinctrl-names = "default";
194 	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
196 	#address-cells = <1>;
197 	#size-cells = <0>;
201 		interrupt-parent = <&gpio6>;
203 		ref-clock-frequency = <26000000>;
208 	pinctrl-names = "default";
209 	pinctrl-0 = <&uart1_pins>;
213 	pinctrl-names = "default";
214 	pinctrl-0 = <&uart2_pins>;
218 	pinctrl-names = "default";
219 	pinctrl-0 = <&uart3_pins>;
227 	interface-type = <0>;
228 	usb-phy = <&usb2_phy>;