ti/omap/omap3-overo-common-lcd43.dtsi

1 // SPDX-License-Identifier: GPL-2.0-only
11 	dss_dpi_pins: dss-dpi-pins {
12 		pinctrl-single,pins = <
44 	lte430_pins: lte430-pins {
45 		pinctrl-single,pins = <
50 	backlight_pins: backlight-pins {
51 		pinctrl-single,pins = <
56 	mcspi1_pins: mcspi1-pins {
57 		pinctrl-single,pins = <
65 	ads7846_pins: ads7846-pins {
66 		pinctrl-single,pins = <
74 	regulator-always-on;
80 	pinctrl-names = "default";
81 	pinctrl-0 = <&dss_dpi_pins>;
85 			remote-endpoint = <&lcd_in>;
86 			data-lines = <24>;
97 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
100 		pinctrl-names = "default";
101 		pinctrl-0 = <&lte430_pins>;
102 		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
106 				remote-endpoint = <&dpi_out>;
110 		panel-timing {
111 			clock-frequency = <9200000>;
114 			hfront-porch = <8>;
115 			hback-porch = <4>;
116 			hsync-len = <41>;
117 			vback-porch = <2>;
118 			vfront-porch = <4>;
119 			vsync-len = <10>;
121 			hsync-active = <0>;
122 			vsync-active = <0>;
123 			de-active = <1>;
124 			pixelclk-active = <1>;
128 	ads7846reg: ads7846-reg {
129 		compatible = "regulator-fixed";
130 		regulator-name = "ads7846-reg";
131 		regulator-min-microvolt = <3300000>;
132 		regulator-max-microvolt = <3300000>;
136 		compatible = "gpio-backlight";
138 		pinctrl-names = "default";
139 		pinctrl-0 = <&backlight_pins>;
142 		default-on;
147 	pinctrl-names = "default";
148 	pinctrl-0 = <&mcspi1_pins>;
152 		pinctrl-names = "default";
153 		pinctrl-0 = <&ads7846_pins>;
156 		vcc-supply = <&ads7846reg>;
159 		spi-max-frequency = <1500000>;
161 		interrupt-parent = <&gpio4>;
163 		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
165 		ti,x-min = /bits/ 16 <0x0>;
166 		ti,x-max = /bits/ 16 <0x0fff>;
167 		ti,y-min = /bits/ 16 <0x0>;
168 		ti,y-max = /bits/ 16 <0x0fff>;
169 		ti,x-plate-ohms = /bits/ 16 <180>;
170 		ti,pressure-max = /bits/ 16 <255>;
172 		wakeup-source;