Lines Matching +full:y +full:- +full:plate +full:- +full:ohms
1 // SPDX-License-Identifier: GPL-2.0-only
11 dss_dpi_pins: dss-dpi-pins {
12 pinctrl-single,pins = <
44 lb035_pins: lb035-pins {
45 pinctrl-single,pins = <
50 backlight_pins: backlight-pins {
51 pinctrl-single,pins = <
56 mcspi1_pins: mcspi1-pins {
57 pinctrl-single,pins = <
66 ads7846_pins: ads7846-pins {
67 pinctrl-single,pins = <
75 regulator-always-on;
81 pinctrl-names = "default";
82 pinctrl-0 = <&dss_dpi_pins>;
86 remote-endpoint = <&lcd_in>;
87 data-lines = <24>;
97 ads7846reg: ads7846-reg {
98 compatible = "regulator-fixed";
99 regulator-name = "ads7846-reg";
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
105 compatible = "gpio-backlight";
107 pinctrl-names = "default";
108 pinctrl-0 = <&backlight_pins>;
111 default-on;
116 pinctrl-names = "default";
117 pinctrl-0 = <&mcspi1_pins>;
124 spi-max-frequency = <500000>;
125 spi-cpol;
126 spi-cpha;
128 pinctrl-names = "default";
129 pinctrl-0 = <&lb035_pins>;
130 enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
134 remote-endpoint = <&dpi_out>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&ads7846_pins>;
145 vcc-supply = <&ads7846reg>;
148 spi-max-frequency = <1500000>;
150 interrupt-parent = <&gpio4>;
152 pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
154 ti,x-min = /bits/ 16 <0x0>;
155 ti,x-max = /bits/ 16 <0x0fff>;
156 ti,y-min = /bits/ 16 <0x0>;
157 ti,y-max = /bits/ 16 <0x0fff>;
158 ti,x-plate-ohms = /bits/ 16 <180>;
159 ti,pressure-max = /bits/ 16 <255>;
161 wakeup-source;