Lines Matching +full:single +full:- +full:port

1 // SPDX-License-Identifier: GPL-2.0-only
9 #include "omap3-igep.dtsi"
10 #include "omap-gpmc-smsc9221.dtsi"
15 pinctrl-names = "default";
16 pinctrl-0 = <&leds_pins>;
17 compatible = "gpio-leds";
22 default-state = "on";
28 default-state = "off";
34 default-state = "off";
43 /* HS USB Port 1 Power */
45 compatible = "regulator-fixed";
46 regulator-name = "hsusb1_vbus";
47 regulator-min-microvolt = <3300000>;
48 regulator-max-microvolt = <3300000>;
50 startup-delay-us = <70000>;
53 /* HS USB Host PHY on PORT 1 */
55 compatible = "usb-nop-xceiv";
56 reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
57 vcc-supply = <&hsusb1_power>;
58 #phy-cells = <0>;
63 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
66 #address-cells = <1>;
67 #size-cells = <0>;
69 port@0 {
73 remote-endpoint = <&dpi_out>;
77 port@1 {
81 remote-endpoint = <&dvi_connector_in>;
88 compatible = "dvi-connector";
93 ddc-i2c-bus = <&i2c3>;
95 port {
97 remote-endpoint = <&tfp410_out>;
104 pinctrl-names = "default";
105 pinctrl-0 = <
110 tfp410_pins: tfp410-pins {
111 pinctrl-single,pins = <
116 dss_dpi_pins: dss-dpi-pins {
117 pinctrl-single,pins = <
149 uart2_pins: uart2-pins {
150 pinctrl-single,pins = <
158 smsc9221_pins: smsc9221-pins {
159 pinctrl-single,pins = <
166 pinctrl-names = "default";
167 pinctrl-0 = <
171 hsusbb1_pins: hsusbb1-pins {
172 pinctrl-single,pins = <
188 leds_pins: leds-pins {
189 pinctrl-single,pins = <
196 mmc1_wp_pins: mmc1-cd-pins {
197 pinctrl-single,pins = <
204 clock-frequency = <100000>;
221 pinctrl-names = "default";
222 pinctrl-0 = <&smsc9221_pins>;
224 interrupt-parent = <&gpio6>;
230 pinctrl-names = "default";
231 pinctrl-0 = <&uart2_pins>;
235 port1-mode = "ehci-phy";
244 regulator-name = "vdds_dsi";
250 port {
252 remote-endpoint = <&tfp410_in>;
253 data-lines = <24>;
259 pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
260 wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */