ti/omap/omap3-cm-t3517.dts

1 // SPDX-License-Identifier: GPL-2.0
3  * Support for CompuLab CM-T3517
5 /dts-v1/;
8 #include "omap3-cm-t3x.dtsi"
11 	model = "CompuLab CM-T3517";
12 	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
14 	vmmc: regulator-vmmc {  label
15 		compatible = "regulator-fixed";
16 		regulator-name = "vmmc";
17 		regulator-min-microvolt = <3300000>;
18 		regulator-max-microvolt = <3300000>;
22 		compatible = "regulator-fixed";
23 		regulator-name = "vw1271";
24 		pinctrl-names = "default";
25 		pinctrl-0 = <
29 		regulator-min-microvolt = <1800000>;
30 		regulator-max-microvolt = <1800000>;
32 		startup-delay-us = <20000>;
33 		enable-active-high;
37 		compatible = "regulator-fixed";
38 		regulator-name = "vwl1271_vaux2";
39 		regulator-min-microvolt = <1800000>;
40 		regulator-max-microvolt = <1800000>;
46 	wl12xx_wkup_pins: wl12xx-wkup-pins {
47 		pinctrl-single,pins = <
56 	phy1_reset_pins: hsusb1-phy-reset-pins {
57 		pinctrl-single,pins = <
62 	phy2_reset_pins: hsusb2-phy-reset-pins {
63 		pinctrl-single,pins = <
68 	otg_drv_vbus: otg-drv-vbus-pins {
69 		pinctrl-single,pins = <
74 	mmc2_pins: mmc2-pins {
75 		pinctrl-single,pins = <
85 	wl12xx_core_pins: wl12xx-core-pins {
86 		pinctrl-single,pins = <
92 	usb_hub_pins: usb-hub-pins {
93 		pinctrl-single,pins = <
94 			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
100 	pinctrl-names = "default";
101 	pinctrl-0 = <&phy1_reset_pins>;
102 	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
106 	pinctrl-names = "default";
107 	pinctrl-0 = <&phy2_reset_pins>;
108 	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
121 	pinctrl-names = "default";
122 	pinctrl-0 = <&otg_drv_vbus>;
126 	vmmc-supply = <&vmmc>;
130 	pinctrl-names = "default";
131 	pinctrl-0 = <&mmc2_pins>;
132 	vmmc-supply = <&wl12xx_vmmc2>;
133 	vqmmc-supply = <&wl12xx_vaux2>;
134 	non-removable;
135 	bus-width = <4>;
136 	cap-power-off-card;
138 	#address-cells = <1>;
139 	#size-cells = <0>;
143 		interrupt-parent = <&gpio5>;
145 		ref-clock-frequency = <38400000>;
152 	pinctrl-names = "default";
153 	pinctrl-0 = <