Lines Matching +full:0 +full:x150
10 pinctrl-0 = <&usb_mdm6600_pins>;
27 #phy-cells = <0>;
33 #phy-cells = <0>;
38 pinctrl-0 = <&vibrator_direction_pin>;
43 ti,clock-source = <0x01>;
48 pinctrl-0 = <&vibrator_enable_pin>;
53 ti,clock-source = <0x01>;
58 pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
66 pinctrl-0 = <&hdq_pins>;
74 reg = <0x4a>;
76 pinctrl-0 = <&touchscreen_pins>;
82 <&omap4_pmx_core 0x160>;
89 reg = <0x44>;
92 pinctrl-0 = <&als_proximity_pins>;
102 /* 0x4a100120 hdq_sio.hdq_sio aa27 */
103 OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
110 OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
116 OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
117 OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
123 /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
124 OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
126 /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
127 OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
129 /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
130 OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
132 /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
133 OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
135 /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
136 OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
138 /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
139 OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
141 /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
142 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
144 /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
145 OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
147 /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
148 OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
150 /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
151 OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
153 /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
154 OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
161 OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
162 OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
163 OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
164 OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
165 OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
166 OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
167 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
168 OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
169 OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
170 OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
171 OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
177 OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
183 OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
189 OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
222 reg = <0x0c>;
229 rotation-matrix = "-1", "0", "0",
230 "0", "1", "0",
231 "0", "0", "-1";