ti/omap/logicpd-torpedo-som.dtsi

1 // SPDX-License-Identifier: GPL-2.0-only
3 #include <dt-bindings/input/input.h>
7 		stdout-path = &uart1;
12 			cpu0-supply = <&vcc>;
22 		compatible = "gpio-leds";
23 		led-user0 {
26 			linux,default-trigger = "none";
32 		#clock-cells = <0>;
33 		compatible = "fixed-clock";
34 		clock-frequency = <26000000>;
44 	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
46 	nand@0,0 {
47 		compatible = "ti,omap2-nand";
49 		interrupt-parent = <&gpmc>;
52 		linux,mtd-name = "micron,mt29f4g16abbda3w";
53 		nand-bus-width = <16>;
54 		ti,nand-ecc-opt = "bch8";
55 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
56 		gpmc,sync-clk-ps = <0>;
57 		gpmc,cs-on-ns = <0>;
58 		gpmc,cs-rd-off-ns = <44>;
59 		gpmc,cs-wr-off-ns = <44>;
60 		gpmc,adv-on-ns = <6>;
61 		gpmc,adv-rd-off-ns = <34>;
62 		gpmc,adv-wr-off-ns = <44>;
63 		gpmc,we-off-ns = <40>;
64 		gpmc,oe-off-ns = <54>;
65 		gpmc,access-ns = <64>;
66 		gpmc,rd-cycle-ns = <82>;
67 		gpmc,wr-cycle-ns = <82>;
68 		gpmc,wr-access-ns = <40>;
69 		gpmc,wr-data-mux-bus-ns = <0>;
70 		gpmc,device-width = <2>;
71 		#address-cells = <1>;
72 		#size-cells = <1>;
77 	pinctrl-names = "default";
78 	pinctrl-0 = <&i2c1_pins>;
79 	clock-frequency = <2600000>;
84 		interrupt-parent = <&intc>;
86 		clock-names = "fck";
89 			compatible = "ti,twl4030-audio";
97 	pinctrl-names = "default";
98 	pinctrl-0 = <&i2c2_pins>;
99 	clock-frequency = <400000>;
103 	pinctrl-names = "default";
104 	pinctrl-0 = <&i2c3_pins>;
105 	clock-frequency = <400000>;
114 	mcbsp2_pins: mcbsp2-pins {
115 		pinctrl-single,pins = <
122 	uart2_pins: uart2-pins {
123 		pinctrl-single,pins = <
131 	mcspi1_pins: mcspi1-pins {
132 		pinctrl-single,pins = <
139 	hsusb_otg_pins: hsusb-otg-pins {
140 		pinctrl-single,pins = <
156 	i2c1_pins: i2c1-pins {
157 		pinctrl-single,pins = <
162 	i2c2_pins: i2c2-pins {
163 		pinctrl-single,pins = <
168 	i2c3_pins: i2c3-pins {
169 		pinctrl-single,pins = <
177 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
178 	pinctrl-names = "default";
179 	pinctrl-0 = <&uart2_pins>;
183 	pinctrl-names = "default";
184 	pinctrl-0 = <&mcspi1_pins>;
192 		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
198 	ti,use-leds;