ti/omap/logicpd-som-lv-baseboard.dtsi

1 // SPDX-License-Identifier: GPL-2.0-only
5 		compatible = "gpio-keys";
6 		pinctrl-names = "default";
7 		pinctrl-0 = <&gpio_key_pins>;
13 			wakeup-source;
18 		compatible = "ti,omap-twl4030";
24 		compatible = "gpio-leds";
25 		pinctrl-names = "default";
26 		pinctrl-0 = <&led_pins &led_pins_wkup>;
31 			linux,default-trigger = "cpu0";
37 			linux,default-trigger = "none";
43 	regulator-min-microvolt = <3000000>;
44 	regulator-max-microvolt = <3000000>;
48 	regulator-min-microvolt = <1800000>;
49 	regulator-max-microvolt = <1800000>;
54 	pinctrl-names = "default";
55 	pinctrl-0 = <&mcbsp2_pins>;
59 	ti,bb-uvolt = <3200000>;
60 	ti,bb-uamp = <150>;
69 		pinctrl-names = "default";
70 		pinctrl-0 = <&lan9221_pins>;
71 		interrupt-parent = <&gpio5>;
78 	regulator-always-on;
83 	vdds_dsi-supply = <&vpll2>;
84 	vdda_video-supply = <&video_reg>;
85 	pinctrl-names = "default";
86 	pinctrl-0 = <&dss_dpi_pins1>;
89 			remote-endpoint = <&lcd_in>;
90 			data-lines = <16>;
101 		compatible = "regulator-fixed";
102 		regulator-name = "fixed-supply";
103 		regulator-min-microvolt = <3300000>;
104 		regulator-max-microvolt = <3300000>;
110 		pinctrl-names = "default";
111 		pinctrl-0 = <&lcd_enable_pin>;
113 		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
116 				remote-endpoint = <&dpi_out>;
122 		compatible = "pwm-backlight";
123 		pinctrl-names = "default";
124 		pinctrl-0 = <&backlight_pins>;
126 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
127 		default-brightness-level = <7>;
128 		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
133 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
134 	pinctrl-names = "default";
135 	pinctrl-0 = <&mmc1_pins>;
136 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
137 	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;			/* gpio_110 */
138 	vmmc-supply = <&vmmc1>;
139 	bus-width = <4>;
140 	cap-power-off-card;
144 	gpio_key_pins: gpio-key-pins {
145 		pinctrl-single,pins = <
150 	led_pins: led-pins {
151 		pinctrl-single,pins = <
156 	lan9221_pins: lan9221-pins {
157 		pinctrl-single,pins = <
162 	mmc1_pins: mmc1-pins {
163 		pinctrl-single,pins = <
175 	lcd_enable_pin: lcd-enable-pins {
176 		pinctrl-single,pins = <
181 	dss_dpi_pins1: dss-dpi1-pins {
182 		pinctrl-single,pins = <
209 	led_pins_wkup: led-wkup-pins {
210 		pinctrl-single,pins = <
215 	backlight_pins: backlight-pins {
216 		pinctrl-single,pins = <
224 	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
229 	pinctrl-names = "default";
230 	pinctrl-0 = <&hsusb_otg_pins>;
231 	interface-type = <0>;
232 	usb-phy = <&usb2_phy>;
234 	phy-names = "usb2-phy";