ti/omap/am57xx-sbc-am57x.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3  * Support for CompuLab SBC-AM57x single board computer
5  * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
9 #include "am57xx-cl-som-am57x.dts"
10 #include "compulab-sb-som.dtsi"
13 	model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
14 …compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", …
23 	uart3_pins_default: uart3-default-pins {
24 		pinctrl-single,pins = <
30 	mmc1_pins_default: mmc1-default-pins {
31 		pinctrl-single,pins = <
43 	usb1_pins: usb1-pins {
44 		pinctrl-single,pins = <
49 	i2c5_pins_default: i2c5-default-pins {
50 		pinctrl-single,pins = <
56 	lcd_pins_default: lcd-default-pins {
57 		pinctrl-single,pins = <
62 	hdmi_pins: hdmi-pins {
63 		pinctrl-single,pins = <
69 	hdmi_conn_pins: hdmi-conn-pins {
70 		pinctrl-single,pins = <
78 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
81 	pinctrl-names = "default";
82 	pinctrl-0 = <&uart3_pins_default>;
88 	pinctrl-names = "default";
89 	pinctrl-0 = <&mmc1_pins_default>;
91 	vmmc-supply = <&ldo1_reg>;
92 	bus-width = <4>;
93 	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
94 	wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
98 	pinctrl-names = "default";
99 	pinctrl-0 = <&usb1_pins>;
104 	pinctrl-names = "default";
105 	pinctrl-0 = <&i2c5_pins_default>;
106 	clock-frequency = <400000>;
117 		gpio-controller;
118 		#gpio-cells = <2>;
125 	vdda_video-supply = <&ldoln_reg>;
127 	port {
129 			remote-endpoint = <&lcd_in>;
130 			data-lines = <24>;
136 	pinctrl-names = "default";
137 	pinctrl-0 = <&lcd_pins_default>;
139 	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
142 	port {
144 			remote-endpoint = <&dpi_lcd_out>;
145 			data-lines = <24>;
152 	vdda-supply = <&ldo4_reg>;
154 	pinctrl-names = "default";
155 	pinctrl-0 = <&hdmi_pins>;
157 	port {
159 			remote-endpoint = <&hdmi_connector_in>;
166 	pinctrl-names = "default";
167 	pinctrl-0 = <&hdmi_conn_pins>;
169 	hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
171 	port {
173 			remote-endpoint = <&hdmi_out>;