Lines Matching +full:dual +full:- +full:emac +full:- +full:pvid
6 * Copyright (C) 2018 EETS GmbH - https://www.eets.ch/
8 * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
10 * SPDX-License-Identifier: GPL-2.0+
13 /dts-v1/;
16 #include <dt-bindings/interrupt-controller/irq.h>
17 #include <dt-bindings/leds/leds-pca9532.h>
24 stdout-path = &uart3;
29 cpu0-supply = <&vdd1_reg>;
39 compatible = "regulator-fixed";
40 regulator-name = "vbat";
41 regulator-min-microvolt = <3600000>;
42 regulator-max-microvolt = <3600000>;
43 regulator-boot-on;
47 compatible = "regulator-fixed";
48 regulator-name = "lis3_reg";
49 regulator-boot-on;
55 pinctrl-names = "default";
56 pinctrl-0 = <&lcd_pins_s0>;
57 panel-info {
58 ac-bias = <255>;
59 ac-bias-intrpt = <0>;
60 dma-burst-sz = <16>;
63 sync-edge = <0>;
64 sync-ctrl = <1>;
65 raster-order = <0>;
66 fifo-th = <0>;
69 display-timings {
70 timing-240x320p16 {
71 clock-frequency = <6500000>;
74 hfront-porch = <6>;
75 hback-porch = <6>;
76 hsync-len = <1>;
77 vback-porch = <6>;
78 vfront-porch = <6>;
79 vsync-len = <1>;
80 hsync-active = <0>;
81 vsync-active = <0>;
82 pixelclk-active = <1>;
83 de-active = <0>;
90 pinctrl-names = "default";
91 pinctrl-0 = <&clkout2_pin>;
93 i2c0_pins: i2c0-pins {
94 pinctrl-single,pins = <
100 i2c1_pins: i2c1-pins {
101 pinctrl-single,pins = <
107 i2c2_pins: i2c2-pins {
108 pinctrl-single,pins = <
114 spi1_pins: spi1-pins {
115 pinctrl-single,pins = <
123 uart0_pins: uart0-pins {
124 pinctrl-single,pins = <
131 uart1_pins: uart1-pins {
132 pinctrl-single,pins = <
138 uart3_pins: uart3-pins {
139 pinctrl-single,pins = <
145 clkout2_pin: clkout2-pins {
146 pinctrl-single,pins = <
151 cpsw_default: cpsw-default-pins {
152 pinctrl-single,pins = <
189 davinci_mdio_default: davinci-mdio-default-pins {
190 pinctrl-single,pins = <
196 mmc1_pins: mmc1-pins {
198 pinctrl-single,pins = <
208 mmc2_pins: mmc2-pins {
210 pinctrl-single,pins = <
222 lcd_pins_s0: lcd-s0-pins {
223 pinctrl-single,pins = <
247 dcan0_pins: dcan0-pins {
248 pinctrl-single,pins = <
256 pinctrl-names = "default";
257 pinctrl-0 = <&uart0_pins>;
259 rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
260 rs485-rts-active-high;
261 rs485-rts-delay = <0 0>;
262 linux,rs485-enabled-at-boot-time;
268 pinctrl-names = "default";
269 pinctrl-0 = <&uart1_pins>;
275 pinctrl-names = "default";
276 pinctrl-0 = <&uart3_pins>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&i2c0_pins>;
286 clock-frequency = <400000>;
300 pinctrl-names = "default";
301 pinctrl-0 = <&i2c1_pins>;
304 clock-frequency = <100000>;
329 default-state = "on";
349 tft-panel@0 {
351 linux,default-trigger = "backlight";
352 default-state = "on";
363 pinctrl-names = "default";
364 pinctrl-0 = <&i2c2_pins>;
367 clock-frequency = <100000>;
371 pinctrl-names = "default";
372 pinctrl-0 = <&spi1_pins>;
373 ti,pindir-d0-out-d1-in;
376 display-controller@0 {
379 spi-max-frequency = <1000000>;
381 spi-cpol;
382 spi-cpha;
406 vcc1-supply = <&vbat>;
407 vcc2-supply = <&vbat>;
408 vcc3-supply = <&vbat>;
409 vcc4-supply = <&vbat>;
410 vcc5-supply = <&vbat>;
411 vcc6-supply = <&vbat>;
412 vcc7-supply = <&vbat>;
413 vccio-supply = <&vbat>;
417 regulator-name = "ldo_vrtc";
418 regulator-always-on;
422 regulator-name = "buck_vdd_ddr";
423 regulator-always-on;
428 regulator-name = "buck_vdd_mpu";
429 regulator-min-microvolt = <912500>;
430 regulator-max-microvolt = <1312500>;
431 regulator-boot-on;
432 regulator-always-on;
437 regulator-name = "buck_vdd_core";
438 regulator-min-microvolt = <912500>;
439 regulator-max-microvolt = <1150000>;
440 regulator-boot-on;
441 regulator-always-on;
445 regulator-name = "boost_res";
446 regulator-always-on;
450 regulator-name = "ldo_vdig1";
451 regulator-always-on;
455 regulator-name = "ldo_vdig2";
456 regulator-always-on;
460 regulator-name = "ldo_vpll";
461 regulator-always-on;
465 regulator-name = "ldo_vdac";
466 regulator-always-on;
470 regulator-name = "ldo_vaux1";
471 regulator-always-on;
475 regulator-name = "ldo_vaux2";
476 regulator-always-on;
480 regulator-name = "ldo_vaux33";
481 regulator-always-on;
485 regulator-name = "ldo_vmmc";
486 regulator-min-microvolt = <1800000>;
487 regulator-max-microvolt = <3300000>;
488 regulator-always-on;
492 regulator-name = "bat_vbb";
498 pinctrl-names = "default";
499 pinctrl-0 = <&cpsw_default>;
504 pinctrl-names = "default";
505 pinctrl-0 = <&davinci_mdio_default>;
507 ethphy0: ethernet-phy@0 {
511 ethphy1: ethernet-phy@1 {
517 phy-handle = <ðphy0>;
518 phy-mode = "mii";
519 ti,dual-emac-pvid = <1>;
523 phy-handle = <ðphy1>;
524 phy-mode = "mii";
525 ti,dual-emac-pvid = <2>;
532 ti,x-plate-resistance = <200>;
533 ti,coordinate-readouts = <5>;
534 ti,wire-config = <0x01 0x10 0x22 0x33>;
535 ti,charge-delay = <0x400>;
539 ti,adc-channels = <4 5 6 7>;
545 vmmc-supply = <&vmmc_reg>;
546 bus-width = <4>;
547 pinctrl-names = "default";
548 pinctrl-0 = <&mmc1_pins>;
549 non-removable;
554 vmmc-supply = <&vmmc_reg>;
555 bus-width = <4>;
556 pinctrl-names = "default";
557 pinctrl-0 = <&mmc2_pins>;
558 cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
571 pinctrl-names = "default";
572 pinctrl-0 = <&dcan0_pins>;