Lines Matching +full:vdd_io +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
11 /dts-v1/;
14 #include <dt-bindings/pwm/pwm.h>
15 #include <dt-bindings/interrupt-controller/irq.h>
18 model = "TI AM335x EVM-SK";
19 compatible = "ti,am335x-evmsk", "ti,am33xx";
23 cpu0-supply = <&vdd1_reg>;
33 stdout-path = &uart0;
37 compatible = "regulator-fixed";
38 regulator-name = "vbat";
39 regulator-min-microvolt = <5000000>;
40 regulator-max-microvolt = <5000000>;
41 regulator-boot-on;
45 compatible = "regulator-fixed";
46 regulator-name = "lis3_reg";
47 regulator-boot-on;
51 pinctrl-names = "default";
52 pinctrl-0 = <&wl12xx_gpio>;
53 compatible = "regulator-fixed";
54 regulator-name = "vwl1271";
55 regulator-min-microvolt = <1800000>;
56 regulator-max-microvolt = <1800000>;
58 startup-delay-us = <70000>;
59 enable-active-high;
63 compatible = "regulator-fixed";
64 regulator-name = "vtt";
65 regulator-min-microvolt = <1500000>;
66 regulator-max-microvolt = <1500000>;
68 regulator-always-on;
69 regulator-boot-on;
70 enable-active-high;
74 v1_8d_reg: fixedregulator-v1_8d {
75 compatible = "regulator-fixed";
76 regulator-name = "v1_8d";
77 vin-supply = <&vbat>;
78 regulator-min-microvolt = <1800000>;
79 regulator-max-microvolt = <1800000>;
83 v3_3d_reg: fixedregulator-v3_3d {
84 compatible = "regulator-fixed";
85 regulator-name = "v3_3d";
86 vin-supply = <&vbat>;
87 regulator-min-microvolt = <3300000>;
88 regulator-max-microvolt = <3300000>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&user_leds_s0>;
95 compatible = "gpio-leds";
100 default-state = "off";
106 default-state = "off";
112 linux,default-trigger = "mmc0";
113 default-state = "off";
119 linux,default-trigger = "heartbeat";
120 default-state = "off";
125 compatible = "gpio-keys";
126 #address-cells = <1>;
127 #size-cells = <0>;
145 wakeup-source;
156 compatible = "pwm-backlight";
158 brightness-levels = <0 58 61 66 75 90 125 170 255>;
159 default-brightness-level = <8>;
163 compatible = "simple-audio-card";
164 simple-audio-card,name = "AM335x-EVMSK";
165 simple-audio-card,widgets =
167 simple-audio-card,routing =
170 simple-audio-card,format = "dsp_b";
171 simple-audio-card,bitclock-master = <&sound_master>;
172 simple-audio-card,frame-master = <&sound_master>;
173 simple-audio-card,bitclock-inversion;
175 simple-audio-card,cpu {
176 sound-dai = <&mcasp1>;
179 sound_master: simple-audio-card,codec {
180 sound-dai = <&tlv320aic3106>;
181 system-clock-frequency = <24000000>;
186 compatible = "newhaven,nhd-4.3-480272ef-atxl";
188 pinctrl-names = "default", "sleep";
189 pinctrl-0 = <&lcd_pins_default>;
190 pinctrl-1 = <&lcd_pins_sleep>;
195 remote-endpoint = <&lcdc_0>;
202 pinctrl-names = "default";
203 pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
205 lcd_pins_default: lcd-default-pins {
206 pinctrl-single,pins = <
238 lcd_pins_sleep: lcd-sleep-pins {
239 pinctrl-single,pins = <
272 user_leds_s0: user-leds-s0-pins {
273 pinctrl-single,pins = <
281 gpio_keys_s0: gpio-keys-s0-pins {
282 pinctrl-single,pins = <
290 i2c0_pins: i2c0-pins {
291 pinctrl-single,pins = <
297 uart0_pins: uart0-pins {
298 pinctrl-single,pins = <
304 clkout2_pin: clkout2-pins {
305 pinctrl-single,pins = <
310 ecap2_pins: backlight-pins {
311 pinctrl-single,pins = <
316 cpsw_default: cpsw-default-pins {
317 pinctrl-single,pins = <
348 cpsw_sleep: cpsw-sleep-pins {
349 pinctrl-single,pins = <
380 davinci_mdio_default: davinci-mdio-default-pins {
381 pinctrl-single,pins = <
388 davinci_mdio_sleep: davinci-mdio-sleep-pins {
389 pinctrl-single,pins = <
396 mmc1_pins: mmc1-pins {
397 pinctrl-single,pins = <
409 mcasp1_pins: mcasp1-pins {
410 pinctrl-single,pins = <
418 mcasp1_pins_sleep: mcasp1-sleep-pins {
419 pinctrl-single,pins = <
427 mmc2_pins: mmc2-pins {
428 pinctrl-single,pins = <
439 wl12xx_gpio: wl12xx-gpio-pins {
440 pinctrl-single,pins = <
447 pinctrl-names = "default";
448 pinctrl-0 = <&uart0_pins>;
454 pinctrl-names = "default";
455 pinctrl-0 = <&i2c0_pins>;
458 clock-frequency = <400000>;
467 Vdd-supply = <&lis3_reg>;
468 Vdd_IO-supply = <&lis3_reg>;
470 st,click-single-x;
471 st,click-single-y;
472 st,click-single-z;
473 st,click-thresh-x = <10>;
474 st,click-thresh-y = <10>;
475 st,click-thresh-z = <10>;
476 st,irq1-click;
477 st,irq2-click;
478 st,wakeup-x-lo;
479 st,wakeup-x-hi;
480 st,wakeup-y-lo;
481 st,wakeup-y-hi;
482 st,wakeup-z-lo;
483 st,wakeup-z-hi;
484 st,min-limit-x = <120>;
485 st,min-limit-y = <120>;
486 st,min-limit-z = <140>;
487 st,max-limit-x = <550>;
488 st,max-limit-y = <550>;
489 st,max-limit-z = <750>;
493 #sound-dai-cells = <0>;
499 AVDD-supply = <&v3_3d_reg>;
500 IOVDD-supply = <&v3_3d_reg>;
501 DRVDD-supply = <&v3_3d_reg>;
502 DVDD-supply = <&v1_8d_reg>;
515 pinctrl-names = "default";
516 pinctrl-0 = <&ecap2_pins>;
523 vcc1-supply = <&vbat>;
524 vcc2-supply = <&vbat>;
525 vcc3-supply = <&vbat>;
526 vcc4-supply = <&vbat>;
527 vcc5-supply = <&vbat>;
528 vcc6-supply = <&vbat>;
529 vcc7-supply = <&vbat>;
530 vccio-supply = <&vbat>;
534 regulator-always-on;
538 regulator-always-on;
542 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
543 regulator-name = "vdd_mpu";
544 regulator-min-microvolt = <912500>;
545 regulator-max-microvolt = <1351500>;
546 regulator-boot-on;
547 regulator-always-on;
551 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
552 regulator-name = "vdd_core";
553 regulator-min-microvolt = <912500>;
554 regulator-max-microvolt = <1150000>;
555 regulator-boot-on;
556 regulator-always-on;
560 regulator-always-on;
564 regulator-always-on;
568 regulator-always-on;
572 regulator-always-on;
576 regulator-always-on;
580 regulator-always-on;
584 regulator-always-on;
588 regulator-always-on;
592 regulator-min-microvolt = <1800000>;
593 regulator-max-microvolt = <3300000>;
594 regulator-always-on;
600 pinctrl-names = "default", "sleep";
601 pinctrl-0 = <&cpsw_default>;
602 pinctrl-1 = <&cpsw_sleep>;
607 pinctrl-names = "default", "sleep";
608 pinctrl-0 = <&davinci_mdio_default>;
609 pinctrl-1 = <&davinci_mdio_sleep>;
611 ethphy0: ethernet-phy@0 {
615 ethphy1: ethernet-phy@1 {
621 phy-handle = <ðphy0>;
622 phy-mode = "rgmii-id";
623 ti,dual-emac-pvid = <1>;
627 phy-handle = <ðphy1>;
628 phy-mode = "rgmii-id";
629 ti,dual-emac-pvid = <2>;
634 vmmc-supply = <&vmmc_reg>;
635 bus-width = <4>;
636 pinctrl-names = "default";
637 pinctrl-0 = <&mmc1_pins>;
638 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
650 ti,no-reset-on-init;
655 vmmc-supply = <&wl12xx_vmmc>;
656 non-removable;
657 bus-width = <4>;
658 cap-power-off-card;
659 keep-power-in-suspend;
660 pinctrl-names = "default";
661 pinctrl-0 = <&mmc2_pins>;
663 #address-cells = <1>;
664 #size-cells = <0>;
668 interrupt-parent = <&gpio0>;
670 ref-clock-frequency = <38400000>;
675 #sound-dai-cells = <0>;
676 pinctrl-names = "default", "sleep";
677 pinctrl-0 = <&mcasp1_pins>;
678 pinctrl-1 = <&mcasp1_pins_sleep>;
682 op-mode = <0>; /* MCASP_IIS_MODE */
683 tdm-slots = <2>;
685 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
688 tx-num-evt = <32>;
689 rx-num-evt = <32>;
696 ti,x-plate-resistance = <200>;
697 ti,coordinate-readouts = <5>;
698 ti,wire-config = <0x00 0x11 0x22 0x33>;
705 blue-and-red-wiring = "crossed";
709 remote-endpoint = <&panel_0>;
716 clock-names = "ext-clk", "int-clk";
724 firmware-name = "am335x-evm-scale-data.bin";