Lines Matching +full:cpsw +full:- +full:mdio
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
6 /dts-v1/;
7 #include "am335x-chilisom.dtsi"
11 compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
15 stdout-path = &uart0;
19 compatible = "gpio-leds";
20 pinctrl-names = "default";
21 pinctrl-0 = <&led_gpio_pins>;
26 default-state = "keep";
27 linux,default-trigger = "heartbeat";
33 default-state = "keep";
39 uart0_pins: uart0-pins {
40 pinctrl-single,pins = <
46 cpsw_default: cpsw-default-pins {
47 pinctrl-single,pins = <
60 cpsw_sleep: cpsw-sleep-pins {
61 pinctrl-single,pins = <
75 davinci_mdio_default: davinci-mdio-default-pins {
76 pinctrl-single,pins = <
84 davinci_mdio_sleep: davinci-mdio-sleep-pins {
85 pinctrl-single,pins = <
86 /* MDIO reset value */
92 usb1_drvvbus: usb1-drvvbus-pins {
93 pinctrl-single,pins = <
98 sd_pins: sd-card-pins {
99 pinctrl-single,pins = <
110 led_gpio_pins: led-gpio-pins {
111 pinctrl-single,pins = <
119 pinctrl-names = "default";
120 pinctrl-0 = <&uart0_pins>;
126 regulator-min-microvolt = <3300000>;
127 regulator-max-microvolt = <3300000>;
132 pinctrl-names = "default", "sleep";
133 pinctrl-0 = <&cpsw_default>;
134 pinctrl-1 = <&cpsw_sleep>;
139 pinctrl-names = "default", "sleep";
140 pinctrl-0 = <&davinci_mdio_default>;
141 pinctrl-1 = <&davinci_mdio_sleep>;
143 ethphy0: ethernet-phy@0 {
149 phy-handle = <ðphy0>;
150 phy-mode = "rmii";
151 ti,dual-emac-pvid = <1>;
160 pinctrl-names = "default";
161 pinctrl-0 = <&usb1_drvvbus>;
167 pinctrl-names = "default";
168 pinctrl-0 = <&sd_pins>;
169 vmmc-supply = <&ldo4_reg>;
170 bus-width = <0x4>;
171 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
176 interrupt-parent = <&intc>;