Lines Matching +full:edt +full:- +full:ft5406
1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
3 * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/pwm/pwm.h>
17 stdout-path = "serial0:115200n8";
20 clk_ext_audio_codec: clock-codec {
21 compatible = "fixed-clock";
22 #clock-cells = <0>;
23 clock-frequency = <24000000>;
26 display_bl: display-bl {
27 compatible = "pwm-backlight";
29 brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
30 default-brightness-level = <8>;
31 enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
32 power-supply = <®_panel_bl>;
36 gpio-keys-polled {
37 compatible = "gpio-keys-polled";
38 poll-interval = <20>;
44 button-0 {
45 label = "TA1-GPIO-A";
54 button-1 {
55 label = "TA2-GPIO-B";
64 button-2 {
65 label = "TA3-GPIO-C";
71 gpio-keys {
72 compatible = "gpio-keys";
74 button-3 {
75 label = "TA4-GPIO-D";
78 wakeup-source;
83 compatible = "gpio-leds";
85 led-0 {
88 default-state = "off";
92 led-1 {
95 default-state = "off";
98 led-2 {
101 default-state = "off";
104 led-3 {
107 default-state = "off";
112 compatible = "edt,etm0700g0edh6";
114 power-supply = <®_panel_bl>;
118 remote-endpoint = <&lcd_display_out>;
123 reg_panel_bl: regulator-panel-bl {
124 compatible = "regulator-fixed";
125 regulator-name = "panel_backlight";
126 regulator-min-microvolt = <3300000>;
127 regulator-max-microvolt = <3300000>;
128 vin-supply = <®_panel_supply>;
131 reg_panel_supply: regulator-panel-supply {
132 compatible = "regulator-fixed";
133 regulator-name = "panel_supply";
134 regulator-min-microvolt = <24000000>;
135 regulator-max-microvolt = <24000000>;
139 compatible = "audio-graph-card";
153 pinctrl-names = "default";
154 pinctrl-0 = <&cec_pins_a>;
159 pinctrl-names = "default";
160 pinctrl-0 = <&i2c2_pins_a>;
161 i2c-scl-rising-time-ns = <185>;
162 i2c-scl-falling-time-ns = <20>;
165 /delete-property/dmas;
166 /delete-property/dma-names;
171 pinctrl-names = "default";
172 pinctrl-0 = <&i2c5_pins_a>;
173 i2c-scl-rising-time-ns = <185>;
174 i2c-scl-falling-time-ns = <20>;
177 /delete-property/dmas;
178 /delete-property/dma-names;
183 #sound-dai-cells = <0>;
185 VDDA-supply = <&v3v3>;
186 VDDIO-supply = <&vdd>;
189 #address-cells = <1>;
190 #size-cells = <0>;
194 remote-endpoint = <&sai2a_endpoint>;
199 remote-endpoint = <&sai2b_endpoint>;
206 compatible = "edt,edt-ft5406";
208 interrupt-parent = <&gpioc>;
214 pinctrl-names = "default", "sleep";
215 pinctrl-0 = <<dc_pins_b>;
216 pinctrl-1 = <<dc_sleep_pins_b>;
221 remote-endpoint = <&lcd_panel_in>;
228 clock-names = "pclk", "x8k", "x11k";
229 pinctrl-names = "default", "sleep";
230 pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
231 pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
234 sai2a: audio-controller@4400b004 {
235 #clock-cells = <0>;
236 dma-names = "tx";
238 clock-names = "sai_ck";
243 remote-endpoint = <&sgtl5000_tx_endpoint>;
244 bitclock-master;
245 dai-format = "i2s";
246 dai-tdm-slot-num = <2>;
247 dai-tdm-slot-width = <16>;
248 frame-master;
249 mclk-fs = <256>;
254 sai2b: audio-controller@4400b024 {
255 dma-names = "rx";
258 clock-names = "sai_ck", "MCLK";
263 remote-endpoint = <&sgtl5000_rx_endpoint>;
264 bitclock-master;
265 dai-format = "i2s";
266 dai-tdm-slot-num = <2>;
267 dai-tdm-slot-width = <16>;
268 frame-master;
269 mclk-fs = <256>;
276 /* spare dmas for other usage (un-delete to enable pwm capture) */
277 /delete-property/dmas;
278 /delete-property/dma-names;
281 pinctrl-0 = <&pwm2_pins_a>;
282 pinctrl-names = "default";
291 pinctrl-names = "default";
292 pinctrl-0 = <&usart3_pins_a>;
293 /delete-property/dmas;
294 /delete-property/dma-names;
299 pinctrl-names = "default";
300 pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
301 uart-has-rtscts;
302 /delete-property/dmas;
303 /delete-property/dma-names;
313 pinctrl-0 = <&usbotg_hs_pins_a>;
314 pinctrl-names = "default";
315 phy-names = "usb2-phy";
317 vbus-supply = <&vbus_otg>;
326 phy-supply = <&vdd_usb>;
330 phy-supply = <&vdd_usb>;