dts/samsung/exynos3250-rinato.dts

36 		reg = <0x40000000 0x1ff00000>;
41 		reg = <0x0205f000 0x1000>;
61 	i2c_max77836: i2c-gpio-0 {
66 		#size-cells = <0>;
72 			reg = <0x25>;
152 		io-channels = <&adc 0>;
239 	panel@0 {
241 		reg = <0>;
253 		cs-setup = <0>;
254 		wr-setup = <0>;
256 		wr-hold = <0>;
267 	#size-cells = <0>;
269 	samsung,i2c-slave-addr = <0x10>;
277 		reg = <0x66>;
289 				regulator-name = "VAP_ALIVE_1.0V";
333 				regulator-name = "VAP_PLL_ISO_1.0V";
344 				regulator-name = "VAP_VMIPI_1.0V";
366 				regulator-name = "VAP_USB_3.0V";
539 				regulator-name = "VAP_MIF_1.0V";
550 				regulator-name = "VAP_ARM_1.0V";
561 				regulator-name = "VAP_INT3D_1.0V";
598 	#size-cells = <0>;
600 	samsung,i2c-slave-addr = <0x10>;
608 		reg = <0x36>;
631 	samsung,dw-mshc-sdr-timing = <0 1>;
634 	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
643 	#size-cells = <0>;
650 	samsung,dw-mshc-sdr-timing = <0 1>;
653 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
676 		shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
704 	pinctrl-0 = <&initial0 &sleep0>;
710 		PIN_IN(gpc0-0, DOWN, LV1);
716 		PIN_IN(gpd0-0, DOWN, LV1);
721 		PIN_SLP(gpa0-0, INPUT, DOWN);
730 		PIN_SLP(gpa1-0, INPUT, DOWN);
737 		PIN_SLP(gpb-0, PREV, NONE);
746 		PIN_SLP(gpc0-0, INPUT, DOWN);
752 		PIN_SLP(gpc1-0, INPUT, DOWN);
758 		PIN_SLP(gpd0-0, INPUT, DOWN);
763 		PIN_SLP(gpd1-0, INPUT, NONE);
772 	pinctrl-0 = <&initial1 &sleep1>;
778 		PIN_IN(gpe1-0, DOWN, LV1);
784 		PIN_IN(gpk2-0, DOWN, LV1);
792 		PIN_IN(gpm0-0, DOWN, LV1);
801 		PIN_IN(gpm1-0, DOWN, LV1);
809 		PIN_IN(gpm2-0, DOWN, LV1);
812 		PIN_IN(gpm3-0, DOWN, LV1);
828 		PIN_SLP(gpe0-0, PREV, NONE);
837 		PIN_SLP(gpe1-0, INPUT, DOWN);
846 		PIN_SLP(gpe2-0, INPUT, NONE);
850 		PIN_SLP(gpk0-0, INPUT, DOWN);
859 		PIN_SLP(gpk1-0, INPUT, DOWN);
867 		PIN_SLP(gpk2-0, INPUT, DOWN);
875 		PIN_SLP(gpl0-0, INPUT, DOWN);
880 		PIN_SLP(gpm0-0, INPUT, DOWN);
889 		PIN_SLP(gpm1-0, INPUT, DOWN);
897 		PIN_SLP(gpm2-0, INPUT, DOWN);
903 		PIN_SLP(gpm3-0, INPUT, DOWN);
912 		PIN_SLP(gpm4-0, INPUT, DOWN);