dts/qcom/qcom-ipq4018-ap120c-ac.dtsi

1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
8 	model = "ALFA Network AP120C-AC";
9 	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
16 		stdout-path = "serial0:115200n8";
20 		compatible = "gpio-keys";
22 		key-reset {
31 	i2c0_pins: i2c0-state {
33 		pins = "gpio58", "gpio59";
34 		drive-strength = <16>;
35 		bias-disable;
38 	mdio_pins: mdio-state {
39 		mdio-pins {
40 			pins = "gpio53";
41 			function = "mdio";
42 			bias-pull-up;
45 		mdc-pins {
46 			pins = "gpio52";
48 			bias-pull-up;
52 	serial0_pins: serial0-state {
53 		pins = "gpio60", "gpio61";
55 		bias-disable;
58 	spi0_pins: spi0-state {
59 		spi0-pins {
61 			pins = "gpio55", "gpio56", "gpio57";
62 			drive-strength = <12>;
63 			bias-disable;
66 		spi0-cs-pins {
68 			pins = "gpio54", "gpio4";
69 			drive-strength = <2>;
70 			bias-disable;
71 			output-high;
75 	usb-power-hog {
76 		line-name = "USB-power";
78 		gpio-hog;
79 		output-high;
98 	pinctrl-0 = <&i2c0_pins>;
99 	pinctrl-names = "default";
110 	pinctrl-0 = <&spi0_pins>;
111 	pinctrl-names = "default";
112 	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
115 		compatible = "jedec,spi-nor";
117 		spi-max-frequency = <24000000>;
120 			compatible = "fixed-partitions";
121 			#address-cells = <1>;
122 			#size-cells = <1>;
127 				read-only;
133 				read-only;
139 				read-only;
145 				read-only;
151 				read-only;
155 				label = "u-boot-env";
160 				label = "u-boot";
162 				read-only;
168 				read-only;
169 				compatible = "nvmem-cells";
170 				#address-cells = <1>;
171 				#size-cells = <1>;
185 				read-only;
191 				read-only;
197 		compatible = "spi-nand";
199 		spi-max-frequency = <40000000>;
202 			compatible = "fixed-partitions";
203 			#address-cells = <1>;
204 			#size-cells = <1>;
222 	pinctrl-0 = <&serial0_pins>;
223 	pinctrl-names = "default";
234 &mdio {
237 	pinctrl-0 = <&mdio_pins>;
238 	pinctrl-names = "default";
243 	nvmem-cell-names = "pre-calibration";
244 	nvmem-cells = <&precal_art_1000>;
249 	nvmem-cell-names = "pre-calibration";
250 	nvmem-cells = <&precal_art_5000>;
251 	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
265 	phy-names = "usb2-phy";