Lines Matching +full:v1p8 +full:- +full:supply
1 // SPDX-License-Identifier: BSD-3-Clause
3 /dts-v1/;
5 #include "qcom-msm8226.dtsi"
8 /delete-node/ &smem_region;
13 chassis-type = "handset";
20 #address-cells = <1>;
21 #size-cells = <1>;
25 compatible = "simple-framebuffer";
31 vsp-supply = <®_lcd_pos>;
32 vsn-supply = <®_lcd_neg>;
33 vddio-supply = <&vddio_disp_vreg>;
37 gpio-keys {
38 compatible = "gpio-keys";
40 event-hall-sensor {
43 linux,input-type = <EV_SW>;
45 linux,can-disable;
48 key-volume-up {
52 debounce-interval = <15>;
56 vddio_disp_vreg: regulator-vddio-disp {
57 compatible = "regulator-fixed";
58 regulator-name = "vddio_disp";
60 vin-supply = <&pm8226_l8>;
61 startup-delay-us = <300>;
62 enable-active-high;
63 regulator-boot-on;
66 reserved-memory {
67 #address-cells = <1>;
68 #size-cells = <1>;
73 no-map;
78 no-map;
83 no-map;
88 no-map;
94 no-map;
103 compatible = "asahi-kasei,ak8963";
105 interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
106 reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
107 vdd-supply = <&pm8226_l19>;
108 vid-supply = <&pm8226_lvs1>;
109 pinctrl-0 = <&mag_int_default &mag_reset_default>;
110 pinctrl-names = "default";
114 compatible = "st,lis3dh-accel";
116 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
117 vdd-supply = <&pm8226_l19>;
118 vddio-supply = <&pm8226_lvs1>;
119 pinctrl-0 = <&accel_int_default>;
120 pinctrl-names = "default";
121 mount-matrix = "0", "1", "0",
123 "0", "0", "-1";
124 st,drdy-int-pin = <1>;
134 pinctrl-0 = <®_lcd_default>;
135 pinctrl-names = "default";
138 regulator-name = "outp";
139 regulator-min-microvolt = <4000000>;
140 regulator-max-microvolt = <6000000>;
141 regulator-active-discharge = <1>;
142 regulator-boot-on;
143 enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
147 regulator-name = "outn";
148 regulator-min-microvolt = <4000000>;
149 regulator-max-microvolt = <6000000>;
150 regulator-active-discharge = <1>;
151 regulator-boot-on;
152 enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
156 temperature-sensor@48 {
159 interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
160 pinctrl-0 = <&temp_alert_default>;
161 pinctrl-names = "default";
162 #thermal-sensor-cells = <0>;
177 compatible = "qcom,rpm-pm8226-regulators";
180 regulator-min-microvolt = <1200000>;
181 regulator-max-microvolt = <1300000>;
185 regulator-min-microvolt = <1800000>;
186 regulator-max-microvolt = <2200000>;
190 regulator-min-microvolt = <1150000>;
191 regulator-max-microvolt = <1150000>;
195 regulator-min-microvolt = <1225000>;
196 regulator-max-microvolt = <1225000>;
200 regulator-min-microvolt = <1200000>;
201 regulator-max-microvolt = <1200000>;
205 regulator-min-microvolt = <750000>;
206 regulator-max-microvolt = <1337500>;
210 regulator-min-microvolt = <1200000>;
211 regulator-max-microvolt = <1200000>;
215 regulator-min-microvolt = <1200000>;
216 regulator-max-microvolt = <1200000>;
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
222 regulator-allow-set-load;
226 regulator-min-microvolt = <1850000>;
227 regulator-max-microvolt = <1850000>;
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <1800000>;
236 regulator-min-microvolt = <2050000>;
237 regulator-max-microvolt = <2050000>;
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <1800000>;
246 regulator-min-microvolt = <1800000>;
247 regulator-max-microvolt = <1800000>;
251 regulator-min-microvolt = <2750000>;
252 regulator-max-microvolt = <2750000>;
256 regulator-min-microvolt = <2800000>;
257 regulator-max-microvolt = <2800000>;
261 regulator-min-microvolt = <3000000>;
262 regulator-max-microvolt = <3350000>;
266 regulator-min-microvolt = <2950000>;
267 regulator-max-microvolt = <2950000>;
271 regulator-min-microvolt = <2950000>;
272 regulator-max-microvolt = <2950000>;
276 regulator-min-microvolt = <2850000>;
277 regulator-max-microvolt = <2850000>;
281 regulator-min-microvolt = <3075000>;
282 regulator-max-microvolt = <3075000>;
286 regulator-min-microvolt = <1800000>;
287 regulator-max-microvolt = <2950000>;
288 regulator-allow-set-load;
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <2950000>;
297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvolt = <2950000>;
302 regulator-min-microvolt = <1300000>;
303 regulator-max-microvolt = <1350000>;
307 regulator-min-microvolt = <1775000>;
308 regulator-max-microvolt = <2125000>;
312 regulator-min-microvolt = <1225000>;
313 regulator-max-microvolt = <1225000>;
317 regulator-min-microvolt = <2050000>;
318 regulator-max-microvolt = <2050000>;
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <3400000>;
324 regulator-boot-on;
328 regulator-always-on;
334 vmmc-supply = <&pm8226_l17>;
335 vqmmc-supply = <&pm8226_l6>;
337 bus-width = <8>;
338 non-removable;
344 qcom,fast-charge-safe-current = <2000000>;
345 qcom,fast-charge-current-limit = <1900000>;
346 qcom,fast-charge-safe-voltage = <4400000>;
347 qcom,minimum-input-voltage = <4300000>;
353 accel_int_default: accel-int-default-state {
356 drive-strength = <2>;
357 bias-disable;
358 output-disable;
361 mag_int_default: mag-int-default-state {
364 drive-strength = <2>;
365 bias-disable;
366 output-disable;
369 mag_reset_default: mag-reset-default-state {
372 drive-strength = <2>;
373 bias-disable;
374 output-high;
377 reg_lcd_default: reg-lcd-default-state {
380 drive-strength = <2>;
381 bias-disable;
382 output-high;
385 reg_vddio_disp_default: reg-vddio-disp-default-state {
388 drive-strength = <2>;
389 bias-disable;
390 output-high;
393 temp_alert_default: temp-alert-default-state {
396 drive-strength = <2>;
397 bias-disable;
398 output-disable;
410 v1p8-supply = <&pm8226_l10>;
411 v3p3-supply = <&pm8226_l20>;