nxp/vf/vf610-twr.dts

1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
5 /dts-v1/;
10 	compatible = "fsl,vf610-twr", "fsl,vf610";
22 		compatible = "fixed-clock";
23 		#clock-cells = <0>;
24 		clock-frequency = <24576000>;
28 		compatible = "fixed-clock";
29 		#clock-cells = <0>;
30 		clock-frequency = <50000000>;
34 	reg_3p3v: regulator-3p3v {
35 		compatible = "regulator-fixed";
36 		regulator-name = "3P3V";
37 		regulator-min-microvolt = <3300000>;
38 		regulator-max-microvolt = <3300000>;
39 		regulator-always-on;
42 	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
43 		compatible = "regulator-fixed";
44 		regulator-name = "vcc_3v3_mcu";
45 		regulator-min-microvolt = <3300000>;
46 		regulator-max-microvolt = <3300000>;
50 		compatible = "simple-audio-card";
51 		simple-audio-card,format = "i2s";
52 		simple-audio-card,widgets =
55 			"Speaker", "Speaker Ext",
57 		simple-audio-card,routing =
62 			"Speaker Ext", "LINE_OUT";
64 		simple-audio-card,cpu {
65 			sound-dai = <&sai2>;
66 			frame-master;
67 			bitclock-master;
70 		simple-audio-card,codec {
71 			sound-dai = <&codec>;
72 			frame-master;
73 			bitclock-master;
79 	pinctrl-names = "default";
80 	pinctrl-0 = <&pinctrl_adc0_ad5>;
81 	vref-supply = <&reg_vcc_3v3_mcu>;
87 	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
88 	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
90 	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
95 	bus-num = <0>;
96 	pinctrl-names = "default";
97 	pinctrl-0 = <&pinctrl_dspi0>;
101 		#address-cells = <1>;
102 		#size-cells = <1>;
104 		spi-max-frequency = <16000000>;
105 		spi-cpol;
106 		spi-cpha;
116 	pinctrl-names = "default";
117 	pinctrl-0 = <&pinctrl_esdhc1>;
118 	bus-width = <4>;
119 	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
124 	phy-mode = "rmii";
125 	phy-handle = <&ethphy0>;
126 	pinctrl-names = "default";
127 	pinctrl-0 = <&pinctrl_fec0>;
131 		#address-cells = <1>;
132 		#size-cells = <0>;
134 		ethphy0: ethernet-phy@0 {
138 		ethphy1: ethernet-phy@1 {
145 	phy-mode = "rmii";
146 	phy-handle = <&ethphy1>;
147 	pinctrl-names = "default";
148 	pinctrl-0 = <&pinctrl_fec1>;
153 	clock-frequency = <100000>;
154 	pinctrl-names = "default";
155 	pinctrl-0 = <&pinctrl_i2c0>;
159 	       #sound-dai-cells = <0>;
162 	       VDDA-supply = <&reg_3p3v>;
163 	       VDDIO-supply = <&reg_3p3v>;
169 	vf610-twr {
298 	assigned-clocks = <&clks VF610_CLK_NFC>;
299 	assigned-clock-rates = <33000000>;
300 	pinctrl-names = "default";
301 	pinctrl-0 = <&pinctrl_nfc>;
305 		compatible = "fsl,vf610-nfc-nandcs";
307 		#address-cells = <1>;
308 		#size-cells = <1>;
309 		nand-bus-width = <16>;
310 		nand-ecc-mode = "hw";
311 		nand-ecc-strength = <24>;
312 		nand-ecc-step-size = <2048>;
313 		nand-on-flash-bbt;
318 	pinctrl-names = "default";
319 	pinctrl-0 = <&pinctrl_pwm0>;
324 	#sound-dai-cells = <0>;
325 	pinctrl-names = "default";
326 	pinctrl-0 = <&pinctrl_sai2>;
331 	pinctrl-names = "default";
332 	pinctrl-0 = <&pinctrl_uart1>;
337 	pinctrl-names = "default";
338 	pinctrl-0 = <&pinctrl_uart2>;
343 	disable-over-current;
348 	disable-over-current;