nxp/mxs/imx28-sps1.dts

1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "imx28.dtsi"
11 	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
18 	reg_usb0_vbus: regulator-0 {
19 		compatible = "regulator-fixed";
20 		regulator-name = "usb0_vbus";
21 		regulator-min-microvolt = <5000000>;
22 		regulator-max-microvolt = <5000000>;
23 		gpio = <&gpio3 9 0>;
27 		#address-cells = <1>;
28 		#size-cells = <0>;
29 		compatible = "gpio-leds";
33 			label = "sps1-1:yellow:user";
35 			linux,default-trigger = "heartbeat";
40 			label = "sps1-2:red:user";
42 			linux,default-trigger = "heartbeat";
47 			label = "sps1-3:red:user";
49 			default-trigger = "heartbeat";
57 	pinctrl-names = "default";
58 	pinctrl-0 = <&auart0_pins_a>;
63 	pinctrl-names = "default";
64 	pinctrl-0 = <&duart_pins_a>;
69 	pinctrl-names = "default";
70 	pinctrl-0 = <&i2c0_pins_a>;
86 	phy-mode = "rmii";
87 	pinctrl-names = "default";
88 	pinctrl-0 = <&mac0_pins_a>;
93 	phy-mode = "rmii";
94 	pinctrl-names = "default";
95 	pinctrl-0 = <&mac1_pins_a>;
100 	pinctrl-names = "default";
101 	pinctrl-0 = <&hog_pins_a>;
103 	hog_pins_a: hog-gpios@0 {
105 		fsl,pinmux-ids = <
110 		fsl,drive-strength = <MXS_DRIVE_4mA>;
112 		fsl,pull-up = <MXS_PULL_DISABLE>;
117 	compatible = "fsl,imx28-mmc";
118 	pinctrl-names = "default";
119 	pinctrl-0 = <&mmc0_4bit_pins_a>;
120 	bus-width = <4>;
125 	#address-cells = <1>;
126 	#size-cells = <0>;
127 	compatible = "fsl,imx28-spi";
128 	pinctrl-names = "default";
129 	pinctrl-0 = <&spi2_pins_a>;
133 		#address-cells = <1>;
134 		#size-cells = <1>;
136 		spi-max-frequency = <40000000>;
142 	vbus-supply = <&reg_usb0_vbus>;
143 	pinctrl-names = "default";
144 	pinctrl-0 = <&usb0_pins_b>;