nxp/mxs/imx28-cfa10056.dts

1 // SPDX-License-Identifier: GPL-2.0-or-later
7  * The CFA-10055 is an expansion board for the CFA-10036 module and
8  * CFA-10037, thus we need to include the CFA-10037 DTS.
10 #include "imx28-cfa10037.dts"
13 	model = "Crystalfontz CFA-10056 Board";
16 	spi-2 {
17 		compatible = "spi-gpio";
18 		pinctrl-names = "default";
19 		pinctrl-0 = <&spi2_pins_cfa10056>;
21 		sck-gpios = <&gpio2 16 0>;
22 		mosi-gpios = <&gpio2 17 0>;
23 		miso-gpios = <&gpio2 18 0>;
24 		cs-gpios = <&gpio3 5 0>;
25 		num-chipselects = <1>;
26 		#address-cells = <1>;
27 		#size-cells = <0>;
32 			spi-max-frequency = <100000>;
33 			spi-cpol;
34 			spi-cpha;
35 			gpios-reset = <&gpio3 30 0>;
41 	spi2_pins_cfa10056: spi2-cfa10056@0 {
43 		fsl,pinmux-ids = <
49 		fsl,drive-strength = <MXS_DRIVE_8mA>;
51 		fsl,pull-up = <MXS_PULL_ENABLE>;
54 	lcdif_pins_cfa10056: lcdif-10056@0 {
56 		fsl,pinmux-ids = <
62 		fsl,drive-strength = <MXS_DRIVE_4mA>;
64 		fsl,pull-up = <MXS_PULL_DISABLE>;
67 	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
69 		fsl,pinmux-ids = <
72 		fsl,drive-strength = <MXS_DRIVE_4mA>;
74 		fsl,pull-up = <MXS_PULL_ENABLE>;
79 	pinctrl-names = "default";
80 	pinctrl-0 = <&lcdif_24bit_pins_a
87 		bits-per-pixel = <32>;
88 		bus-width = <24>;
90 		display-timings {
91 			native-mode = <&timing0>;
93 				clock-frequency = <32000000>;
96 				hback-porch = <2>;
97 				hfront-porch = <2>;
98 				vback-porch = <2>;
99 				vfront-porch = <2>;
100 				hsync-len = <5>;
101 				vsync-len = <5>;
102 				hsync-active = <0>;
103 				vsync-active = <0>;
104 				de-active = <1>;
105 				pixelclk-active = <1>;