nxp/mxs/imx28-cfa10037.dts

1 // SPDX-License-Identifier: GPL-2.0-or-later
7  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
8  * need to include the CFA-10036 DTS.
10 #include "imx28-cfa10036.dts"
13 	model = "Crystalfontz CFA-10037 Board";
17 		apbh-bus@80000000 {
19 				usb_pins_cfa10037: usb-10037@0 {
21 					fsl,pinmux-ids = <
24 					fsl,drive-strength = <MXS_DRIVE_4mA>;
26 					fsl,pull-up = <MXS_PULL_DISABLE>;
29 				mac0_pins_cfa10037: mac0-10037@0 {
31 					fsl,pinmux-ids = <
34 					fsl,drive-strength = <MXS_DRIVE_4mA>;
36 					fsl,pull-up = <MXS_PULL_DISABLE>;
41 		apbx-bus@80040000 {
50 			vbus-supply = <&reg_usb1_vbus>;
51 			pinctrl-0 = <&usb1_pins_a>;
52 			pinctrl-names = "default";
57 			phy-mode = "rmii";
58 			pinctrl-names = "default";
59 			pinctrl-0 = <&mac0_pins_a
61 			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
62 			phy-reset-duration = <100>;
67 	reg_usb1_vbus: regulator-0 {
68 		compatible = "regulator-fixed";
69 		pinctrl-names = "default";
70 		pinctrl-0 = <&usb_pins_cfa10037>;
71 		regulator-name = "usb1_vbus";
72 		regulator-min-microvolt = <5000000>;
73 		regulator-max-microvolt = <5000000>;