Lines Matching +full:pixelclk +full:- +full:active
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 Armadeus Systems - <support@armadeus.com>
7 #include "imx28-apf28.dts"
11 compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
13 reg_usb0_vbus: regulator-0 {
14 compatible = "regulator-fixed";
15 regulator-name = "usb0_vbus";
16 regulator-min-microvolt = <5000000>;
17 regulator-max-microvolt = <5000000>;
19 enable-active-high;
22 reg_can0_vcc: regulator-1 {
23 compatible = "regulator-fixed";
24 regulator-name = "can0_vcc";
25 regulator-min-microvolt = <5000000>;
26 regulator-max-microvolt = <5000000>;
30 compatible = "gpio-leds";
35 linux,default-trigger = "heartbeat";
40 compatible = "pwm-backlight";
43 brightness-levels = <0 4 8 16 32 64 128 255>;
44 default-brightness-level = <6>;
47 gpio-keys {
48 compatible = "gpio-keys";
50 user-button {
54 wakeup-source;
60 pinctrl-names = "default";
61 pinctrl-0 = <&auart0_pins_a>;
62 uart-has-rtscts;
67 pinctrl-names = "default";
68 pinctrl-0 = <&can0_pins_a>;
69 xceiver-supply = <®_can0_vcc>;
74 pinctrl-names = "default";
75 pinctrl-0 = <&i2c0_pins_a>;
80 pinctrl-names = "default";
81 pinctrl-0 = <&lcdif_16bit_pins_a
87 bits-per-pixel = <16>;
88 bus-width = <16>;
90 display-timings {
91 native-mode = <&timing0>;
93 clock-frequency = <33000033>;
96 hback-porch = <96>;
97 hfront-porch = <96>;
98 vback-porch = <20>;
99 vfront-porch = <21>;
100 hsync-len = <64>;
101 vsync-len = <4>;
102 hsync-active = <1>;
103 vsync-active = <1>;
104 de-active = <1>;
105 pixelclk-active = <0>;
112 fsl,lradc-touchscreen-wires = <4>;
117 phy-mode = "rmii";
118 pinctrl-names = "default";
119 pinctrl-0 = <&mac1_pins_a>;
120 phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&hog_pins_apf28dev>;
130 fsl,pinmux-ids = <
140 fsl,drive-strength = <MXS_DRIVE_4mA>;
142 fsl,pull-up = <MXS_PULL_DISABLE>;
145 lcdif_pins_apf28dev: lcdif-apf28dev@0 {
147 fsl,pinmux-ids = <
153 fsl,drive-strength = <MXS_DRIVE_4mA>;
155 fsl,pull-up = <MXS_PULL_DISABLE>;
158 usb0_otg_apf28dev: otg-apf28dev@0 {
160 fsl,pinmux-ids = <
163 fsl,drive-strength = <MXS_DRIVE_4mA>;
165 fsl,pull-up = <MXS_PULL_DISABLE>;
170 pinctrl-names = "default";
171 pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
176 compatible = "fsl,imx28-mmc";
177 pinctrl-names = "default";
178 pinctrl-0 = <&mmc0_4bit_pins_a
180 bus-width = <4>;
185 compatible = "fsl,imx28-spi";
186 pinctrl-names = "default";
187 pinctrl-0 = <&spi2_pins_a>;
192 pinctrl-names = "default";
193 pinctrl-0 = <&usb0_otg_apf28dev
195 vbus-supply = <®_usb0_vbus>;