nxp/lpc/lpc3250-ea3250.dts

1 // SPDX-License-Identifier: GPL-2.0-or-later
8 /dts-v1/;
20 	gpio-keys {
21 		compatible = "gpio-keys";
33 			gpios = <&pca9532 0 0>;
39 			gpios = <&pca9532 1 0>;
45 			gpios = <&pca9532 2 0>;
51 			gpios = <&pca9532 3 0>;
85 	leds {
86 		compatible = "gpio-leds";
88 		/* LEDs on OEM Board */
92 			linux,default-trigger = "timer";
93 			default-state = "off";
98 			default-state = "off";
103 			default-state = "off";
108 			default-state = "off";
111 		/* LEDs on Base Board */
114 			gpios = <&pca9532 8 0>;
115 			default-state = "off";
118 			gpios = <&pca9532 9 0>;
119 			default-state = "off";
122 			gpios = <&pca9532 10 0>;
123 			default-state = "off";
126 			gpios = <&pca9532 11 0>;
127 			default-state = "off";
130 			gpios = <&pca9532 12 0>;
131 			default-state = "off";
134 			gpios = <&pca9532 13 0>;
135 			default-state = "off";
138 			gpios = <&pca9532 14 0>;
139 			default-state = "off";
142 			gpios = <&pca9532 15 0>;
143 			default-state = "off";
148 /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
154 	clock-frequency = <100000>;
159 		power-gpio = <&gpio 3 10 0>;
160 		reset-gpio = <&gpio 3 2 0>;
161 		dac-clk = "wspll";
174 	pca9532: pca9532@60 {  label
175 		compatible = "nxp,pca9532";
176 		gpio-controller;
177 		#gpio-cells = <2>;
183 	clock-frequency = <100000>;
187 	clock-frequency = <100000>;
189 	isp1301: usb-transceiver@2d {
196 	phy-mode = "rmii";
197 	use-iram;
208 	wp-gpios = <&pca9532 5 0>;
209 	cd-gpios = <&pca9532 4 0>;
210 	cd-inverted;
211 	bus-width = <4>;
219 	nxp,wdr-clks = <14>;
223 	nxp,rdr-clks = <14>;
227 	nand-on-flash-bbt;
231 		compatible = "fixed-partitions";
232 		#address-cells = <1>;
233 		#size-cells = <1>;
236 			label = "ea3250-boot";
238 			read-only;
242 			label = "ea3250-uboot";
244 			read-only;
248 			label = "ea3250-kernel";
253 			label = "ea3250-rootfs";