Lines Matching +full:keep +full:- +full:vref +full:- +full:on
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "imx6ull-phytec-phycore-som.dtsi"
17 gpio_keys: gpio-keys {
18 compatible = "gpio-key";
19 pinctrl-names = "default";
20 pinctrl-0 = <&pinctrl_gpio_keys>;
23 label = "KEY-A";
26 wakeup-source;
30 reg_adc1_vref_3v3: regulator-vref-3v3 {
31 compatible = "regulator-fixed";
32 regulator-name = "vref-3v3";
33 regulator-min-microvolt = <3300000>;
34 regulator-max-microvolt = <3300000>;
37 reg_s25fl064_hold: regulator-s25fl064-hold {
38 pinctrl-names = "default";
39 pinctrl-0 = <&pinctrl_s25fl064_hold>;
40 compatible = "regulator-fixed";
41 regulator-name = "s25fl064_hold";
42 regulator-min-microvolt = <3300000>;
43 regulator-max-microvolt = <3300000>;
45 enable-active-high;
46 regulator-always-on;
49 reg_usb_hub_vbus: regulator-hub-otg1-vbus {
50 pinctrl-names = "default";
51 pinctrl-0 = <&pinctrl_usbhubpwr>;
52 compatible = "regulator-fixed";
53 regulator-name = "usb_hub_vbus";
54 regulator-min-microvolt = <3300000>;
55 regulator-max-microvolt = <3300000>;
57 enable-active-high;
58 regulator-always-on;
61 reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_usbotg1pwr>;
64 compatible = "regulator-fixed";
65 regulator-name = "usb_otg1_vbus";
66 regulator-min-microvolt = <3300000>;
67 regulator-max-microvolt = <3300000>;
69 enable-active-high;
70 regulator-always-on;
73 user_leds: user-leds {
74 compatible = "gpio-leds";
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_user_leds>,
79 user-led1 {
82 linux,default-trigger = "off";
85 user-led2 {
88 linux,default-trigger = "off";
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_flexcan1>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_flexcan2>;
106 #address-cells = <1>;
107 #size-cells = <0>;
108 pinctrl-names = "default";
109 pinctrl-0 = <&pinctrl_ecspi1>,
111 cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
117 pinctrl-names = "default";
118 pinctrl-0 = <&pinctrl_tpm>;
119 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
121 spi-max-frequency = <20000000>;
122 interrupt-parent = <&gpio5>;
127 #address-cells = <1>;
128 #size-cells = <1>;
129 compatible = " jedec,spi-nor";
131 spi-max-frequency = <40000000>;
132 m25p,fast-read;
138 pinctrl-names = "default";
139 pinctrl-0 = <&pinctrl_ecspi3>;
140 cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
143 dma-names = "rx", "tx";
156 pinctrl-names = "default";
157 pinctrl-0 = <&pinctrl_enet2>;
158 phy-mode = "rmii";
159 phy-handle = <ðphy2>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_tempsense>;
171 interrupt-parent = <&gpio5>;
173 #thermal-sensor-cells = <1>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_rtc_int>;
181 interrupt-parent = <&gpio5>;
187 pinctrl-names = "default", "gpio";
188 pinctrl-0 = <&pinctrl_i2c2>;
189 pinctrl-1 = <&pinctrl_i2c2_gpio>;
190 sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
191 scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
196 pinctrl-names = "default", "gpio";
197 pinctrl-0 = <&pinctrl_i2c3>;
198 pinctrl-1 = <&pinctrl_i2c3_gpio>;
199 sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
200 scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
205 pinctrl-names = "default", "gpio";
206 pinctrl-0 = <&pinctrl_i2c4>;
207 pinctrl-1 = <&pinctrl_i2c4_gpio>;
208 sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
209 scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
214 ethphy2: ethernet-phy@2 {
216 micrel,led-mode = <1>;
218 clock-names = "rmii-ref";
224 pinctrl-names = "default";
225 pinctrl-0 = <&pinctrl_pwm3>;
230 pinctrl-names = "default";
231 pinctrl-0 = <&pinctrl_pwm6>;
236 pinctrl-names = "default";
237 pinctrl-0 = <&pinctrl_pwm7>;
242 pinctrl-names = "default";
243 pinctrl-0 = <&pinctrl_pwm8>;
248 pinctrl-names = "default";
249 pinctrl-0 = <&pinctrl_uart3>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&pinctrl_uart4>;
257 rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
258 linux,rs485-enabled-at-boot-time;
264 pinctrl-names = "default";
265 pinctrl-0 = <&pinctrl_uart5>;
266 uart-has-rtscts;
271 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_uart7>;
278 pinctrl-names = "default";
279 pinctrl-0 = <&pinctrl_usb_otg1>;
280 vbus-supply = <®_usb_otg1_vbus>;
282 disable-over-current;
287 vbus-supply = <®_usb_hub_vbus>;
288 disable-over-current;
294 pinctrl-names = "default", "state_100mhz", "state_200mhz";
295 pinctrl-0 = <&pinctrl_usdhc1>;
296 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
297 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
298 cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
299 no-1-8-v;
300 keep-power-in-suspend;
301 wakeup-source;