nxp/imx/imx6sl-evk.dts

1 // SPDX-License-Identifier: GPL-2.0
5 /dts-v1/;
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
13 	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
16 		stdout-path = &uart1;
25 		compatible = "pwm-backlight";
27 		brightness-levels = <0 4 8 16 32 64 128 255>;
28 		default-brightness-level = <6>;
32 		compatible = "gpio-leds";
33 		pinctrl-names = "default";
34 		pinctrl-0 = <&pinctrl_led>;
36 		led-user {
39 			linux,default-trigger = "heartbeat";
43 	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
44 		compatible = "regulator-fixed";
45 		regulator-name = "usb_otg1_vbus";
46 		regulator-min-microvolt = <5000000>;
47 		regulator-max-microvolt = <5000000>;
49 		enable-active-high;
50 		vin-supply = <&swbst_reg>;
53 	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
54 		compatible = "regulator-fixed";
55 		regulator-name = "usb_otg2_vbus";
56 		regulator-min-microvolt = <5000000>;
57 		regulator-max-microvolt = <5000000>;
59 		enable-active-high;
60 		vin-supply = <&swbst_reg>;
63 	reg_aud3v: regulator-aud3v {
64 		compatible = "regulator-fixed";
65 		regulator-name = "wm8962-supply-3v15";
66 		regulator-min-microvolt = <3150000>;
67 		regulator-max-microvolt = <3150000>;
68 		regulator-boot-on;
71 	reg_aud4v: regulator-aud4v {
72 		compatible = "regulator-fixed";
73 		regulator-name = "wm8962-supply-4v2";
74 		regulator-min-microvolt = <4325000>;
75 		regulator-max-microvolt = <4325000>;
76 		regulator-boot-on;
79 	reg_lcd_3v3: regulator-lcd-3v3 {
80 		compatible = "regulator-fixed";
81 		pinctrl-names = "default";
82 		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
83 		regulator-name = "lcd-3v3";
85 		enable-active-high;
88 	reg_lcd_5v: regulator-lcd-5v {
89 		compatible = "regulator-fixed";
90 		regulator-name = "lcd-5v0";
91 		regulator-min-microvolt = <5000000>;
92 		regulator-max-microvolt = <5000000>;
96 		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
97 		pinctrl-names = "default";
98 		pinctrl-0 = <&pinctrl_hp>;
99 		model = "wm8962-audio";
100 		ssi-controller = <&ssi2>;
101 		audio-codec = <&codec>;
102 		audio-routing =
109 		mux-int-port = <2>;
110 		mux-ext-port = <3>;
111 		hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
117 		dvdd-supply = <&reg_lcd_3v3>;
118 		avdd-supply = <&reg_lcd_5v>;
122 				remote-endpoint = <&display_out>;
129 	pinctrl-names = "default";
130 	pinctrl-0 = <&pinctrl_audmux3>;
135 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
136 	pinctrl-names = "default";
137 	pinctrl-0 = <&pinctrl_ecspi1>;
141 		#address-cells = <1>;
142 		#size-cells = <1>;
143 		compatible = "st,m25p32", "jedec,spi-nor";
144 		spi-max-frequency = <20000000>;
150 	pinctrl-names = "default", "sleep";
151 	pinctrl-0 = <&pinctrl_fec>;
152 	pinctrl-1 = <&pinctrl_fec_sleep>;
153 	phy-mode = "rmii";
158 	clock-frequency = <100000>;
159 	pinctrl-names = "default";
160 	pinctrl-0 = <&pinctrl_i2c1>;
169 				regulator-min-microvolt = <300000>;
170 				regulator-max-microvolt = <1875000>;
171 				regulator-boot-on;
172 				regulator-always-on;
173 				regulator-ramp-delay = <6250>;
177 				regulator-min-microvolt = <300000>;
178 				regulator-max-microvolt = <1875000>;
179 				regulator-boot-on;
180 				regulator-always-on;
181 				regulator-ramp-delay = <6250>;
185 				regulator-min-microvolt = <800000>;
186 				regulator-max-microvolt = <3300000>;
187 				regulator-boot-on;
188 				regulator-always-on;
192 				regulator-min-microvolt = <400000>;
193 				regulator-max-microvolt = <1975000>;
194 				regulator-boot-on;
195 				regulator-always-on;
199 				regulator-min-microvolt = <400000>;
200 				regulator-max-microvolt = <1975000>;
201 				regulator-boot-on;
202 				regulator-always-on;
206 				regulator-min-microvolt = <800000>;
207 				regulator-max-microvolt = <3300000>;
208 				regulator-always-on;
212 				regulator-min-microvolt = <5000000>;
213 				regulator-max-microvolt = <5150000>;
217 				regulator-min-microvolt = <1000000>;
218 				regulator-max-microvolt = <3000000>;
219 				regulator-boot-on;
220 				regulator-always-on;
224 				regulator-boot-on;
225 				regulator-always-on;
229 				regulator-min-microvolt = <800000>;
230 				regulator-max-microvolt = <1550000>;
231 				regulator-always-on;
235 				regulator-min-microvolt = <800000>;
236 				regulator-max-microvolt = <1550000>;
240 				regulator-min-microvolt = <1800000>;
241 				regulator-max-microvolt = <3300000>;
245 				regulator-min-microvolt = <1800000>;
246 				regulator-max-microvolt = <3300000>;
247 				regulator-always-on;
251 				regulator-min-microvolt = <1800000>;
252 				regulator-max-microvolt = <3300000>;
253 				regulator-always-on;
257 				regulator-min-microvolt = <1800000>;
258 				regulator-max-microvolt = <3300000>;
259 				regulator-always-on;
266 	clock-frequency = <100000>;
267 	pinctrl-names = "default";
268 	pinctrl-0 = <&pinctrl_i2c2>;
275 		DCVDD-supply = <&vgen3_reg>;
276 		DBVDD-supply = <&reg_aud3v>;
277 		AVDD-supply = <&vgen3_reg>;
278 		CPVDD-supply = <&vgen3_reg>;
279 		MICVDD-supply = <&reg_aud3v>;
280 		PLLVDD-supply = <&vgen3_reg>;
281 		SPKVDD1-supply = <&reg_aud4v>;
282 		SPKVDD2-supply = <&reg_aud4v>;
287 	pinctrl-names = "default";
288 	pinctrl-0 = <&pinctrl_hog>;
290 	imx6sl-evk {
336 		pinctrl_fec_sleep: fecgrp-sleep {
460 		pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
475 		pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
501 		pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
512 		pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
534 		pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
545 		pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
559 	pinctrl-names = "default";
560 	pinctrl-0 = <&pinctrl_kpp>;
575 	pinctrl-names = "default";
576 	pinctrl-0 = <&pinctrl_lcd>;
581 			remote-endpoint = <&panel_in>;
587 	pinctrl-names = "default";
588 	pinctrl-0 = <&pinctrl_pwm1>;
592 	vin-supply = <&sw2_reg>;
596 	vin-supply = <&sw2_reg>;
608 	pinctrl-names = "default";
609 	pinctrl-0 = <&pinctrl_uart1>;
614 	vbus-supply = <&reg_usb_otg1_vbus>;
615 	pinctrl-names = "default";
616 	pinctrl-0 = <&pinctrl_usbotg1>;
617 	disable-over-current;
622 	vbus-supply = <&reg_usb_otg2_vbus>;
624 	disable-over-current;
629 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
630 	pinctrl-0 = <&pinctrl_usdhc1>;
631 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
632 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
633 	bus-width = <8>;
634 	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
635 	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
640 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
641 	pinctrl-0 = <&pinctrl_usdhc2>;
642 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
643 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
644 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
645 	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
650 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
651 	pinctrl-0 = <&pinctrl_usdhc3>;
652 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
653 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
654 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;