Lines Matching +full:wlan +full:- +full:enable +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0 OR X11
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 stdout-path = &uart2;
18 reg_2p5v: regulator-2p5v {
19 compatible = "regulator-fixed";
20 regulator-name = "2P5V";
21 regulator-min-microvolt = <2500000>;
22 regulator-max-microvolt = <2500000>;
23 regulator-always-on;
26 reg_3p3v: regulator-3p3v {
27 compatible = "regulator-fixed";
28 regulator-name = "3P3V";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
31 regulator-always-on;
34 reg_usb_otg_vbus: regulator-usb-otg-vbus {
35 compatible = "regulator-fixed";
36 regulator-name = "usb_otg_vbus";
37 regulator-min-microvolt = <5000000>;
38 regulator-max-microvolt = <5000000>;
40 enable-active-high;
43 reg_wlan_vmmc: regulator-wlan-vmmc {
44 compatible = "regulator-fixed";
45 pinctrl-names = "default";
46 pinctrl-0 = <&pinctrl_wlan_vmmc>;
47 regulator-name = "reg_wlan_vmmc";
48 regulator-min-microvolt = <1800000>;
49 regulator-max-microvolt = <1800000>;
51 startup-delay-us = <70000>;
52 enable-active-high;
55 gpio-keys {
56 compatible = "gpio-keys";
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_gpio_keys>;
62 gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
68 gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
74 compatible = "gpio-leds";
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_leds>;
78 led-j14-pin1 {
79 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
80 retain-state-suspended;
81 default-state = "off";
84 led-j14-pin3 {
85 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
86 retain-state-suspended;
87 default-state = "off";
90 led-j14-pins8-9 {
91 gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
92 retain-state-suspended;
93 default-state = "off";
96 led-j46-pin2 {
97 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
98 retain-state-suspended;
99 default-state = "off";
102 led-j46-pin3 {
103 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
104 retain-state-suspended;
105 default-state = "off";
109 backlight-lcd {
110 compatible = "pwm-backlight";
112 brightness-levels = <0 4 8 16 32 64 128 255>;
113 default-brightness-level = <7>;
114 power-supply = <®_3p3v>;
118 backlight_lvds0: backlight-lvds0 {
119 compatible = "pwm-backlight";
121 brightness-levels = <0 4 8 16 32 64 128 255>;
122 default-brightness-level = <7>;
123 power-supply = <®_3p3v>;
127 panel-lvds0 {
133 remote-endpoint = <&lvds0_out>;
139 compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
140 "fsl,imx-audio-sgtl5000";
141 model = "imx6dl-nit6xlite-sgtl5000";
142 ssi-controller = <&ssi1>;
143 audio-codec = <&codec>;
144 audio-routing =
148 mux-int-port = <1>;
149 mux-ext-port = <3>;
154 pinctrl-names = "default";
155 pinctrl-0 = <&pinctrl_audmux>;
160 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
162 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
167 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_ecspi1>;
174 spi-max-frequency = <20000000>;
180 pinctrl-names = "default";
181 pinctrl-0 = <&pinctrl_enet>;
182 phy-mode = "rgmii";
183 phy-handle = <ðphy>;
184 phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
185 /delete-property/ interrupts;
186 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
188 fsl,err006687-workaround-present;
192 #address-cells = <1>;
193 #size-cells = <0>;
195 ethphy: ethernet-phy {
196 compatible = "ethernet-phy-ieee802.3-c22";
197 txen-skew-ps = <0>;
198 txc-skew-ps = <3000>;
199 rxdv-skew-ps = <0>;
200 rxc-skew-ps = <3000>;
201 rxd0-skew-ps = <0>;
202 rxd1-skew-ps = <0>;
203 rxd2-skew-ps = <0>;
204 rxd3-skew-ps = <0>;
205 txd0-skew-ps = <0>;
206 txd1-skew-ps = <0>;
207 txd2-skew-ps = <0>;
208 txd3-skew-ps = <0>;
214 ddc-i2c-bus = <&i2c2>;
219 clock-frequency = <100000>;
220 pinctrl-names = "default";
221 pinctrl-0 = <&pinctrl_i2c1>;
226 pinctrl-names = "default";
227 pinctrl-0 = <&pinctrl_sgtl5000>;
229 #sound-dai-cells = <0>;
231 VDDA-supply = <®_2p5v>;
232 VDDIO-supply = <®_3p3v>;
237 clock-frequency = <100000>;
238 pinctrl-names = "default";
239 pinctrl-0 = <&pinctrl_i2c2>;
244 clock-frequency = <100000>;
245 pinctrl-names = "default";
246 pinctrl-0 = <&pinctrl_i2c3>;
252 interrupt-parent = <&gpio1>;
254 wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
258 compatible = "edt,edt-ft5x06";
260 interrupt-parent = <&gpio1>;
262 wakeup-source;
267 pinctrl-names = "default";
268 pinctrl-0 = <&pinctrl_rtc>;
270 interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
275 pinctrl-names = "default";
276 pinctrl-0 = <&pinctrl_j10>;
277 pinctrl-1 = <&pinctrl_j28>;
279 imx6dl-nit6xlite {
322 pinctrl_gpio_keys: gpio-keysgrp {
405 pinctrl_wlan_vmmc: wlan-vmmcgrp {
451 /* power enable, high active */
484 lvds-channel@0 {
491 remote-endpoint = <&panel_in_lvds0>;
502 pinctrl-names = "default";
503 pinctrl-0 = <&pinctrl_pwm1>;
508 pinctrl-names = "default";
509 pinctrl-0 = <&pinctrl_pwm3>;
514 pinctrl-names = "default";
515 pinctrl-0 = <&pinctrl_pwm4>;
524 pinctrl-names = "default";
525 pinctrl-0 = <&pinctrl_uart1>;
530 pinctrl-names = "default";
531 pinctrl-0 = <&pinctrl_uart2>;
536 pinctrl-names = "default";
537 pinctrl-0 = <&pinctrl_uart3>;
538 uart-has-rtscts;
547 vbus-supply = <®_usb_otg_vbus>;
548 pinctrl-names = "default";
549 pinctrl-0 = <&pinctrl_usbotg>;
550 disable-over-current;
555 pinctrl-names = "default";
556 pinctrl-0 = <&pinctrl_usdhc2>;
557 bus-width = <4>;
558 non-removable;
559 vmmc-supply = <®_3p3v>;
560 vqmmc-supply = <®_wlan_vmmc>;
561 cap-power-off-card;
562 keep-power-in-suspend;
567 pinctrl-names = "default";
568 pinctrl-0 = <&pinctrl_usdhc3>;
569 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
570 vmmc-supply = <®_3p3v>;