Lines Matching +full:vbus +full:- +full:divider
4 * This file is dual-licensed: you can use it either under the terms
22 * MA 02110-1301 USA
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/input/input.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
64 stdout-path = &uart2;
67 backlight-display {
68 compatible = "pwm-backlight";
70 brightness-levels = <
83 default-brightness-level = <100>;
86 backlight-keypad {
87 compatible = "gpio-backlight";
89 default-on;
92 gpio-keys {
93 compatible = "gpio-keys";
95 user-pb {
101 user-pb1x {
104 interrupt-parent = <&gsc>;
108 key-erased {
109 label = "key-erased";
111 interrupt-parent = <&gsc>;
115 eeprom-wp {
118 interrupt-parent = <&gsc>;
125 interrupt-parent = <&gsc>;
129 switch-hold {
132 interrupt-parent = <&gsc>;
138 compatible = "gpio-leds";
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_gpio_leds>;
142 led0: led-user1 {
145 default-state = "on";
146 linux,default-trigger = "heartbeat";
149 led1: led-user2 {
152 default-state = "off";
155 led2: led-user3 {
158 default-state = "off";
168 compatible = "pps-gpio";
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_pps>;
174 reg_2p5v: regulator-2p5v {
175 compatible = "regulator-fixed";
176 regulator-name = "2P5V";
177 regulator-min-microvolt = <2500000>;
178 regulator-max-microvolt = <2500000>;
179 regulator-always-on;
182 reg_3p3v: regulator-3p3v {
183 compatible = "regulator-fixed";
184 regulator-name = "3P3V";
185 regulator-min-microvolt = <3300000>;
186 regulator-max-microvolt = <3300000>;
187 regulator-always-on;
190 reg_5p0v: regulator-5p0v {
191 compatible = "regulator-fixed";
192 regulator-name = "5P0V";
193 regulator-min-microvolt = <5000000>;
194 regulator-max-microvolt = <5000000>;
195 regulator-always-on;
198 reg_12p0v: regulator-12p0v {
199 compatible = "regulator-fixed";
200 regulator-name = "12P0V";
201 regulator-min-microvolt = <12000000>;
202 regulator-max-microvolt = <12000000>;
204 enable-active-high;
207 reg_1p4v: regulator-vddsoc {
208 compatible = "regulator-fixed";
209 regulator-name = "vdd_soc";
210 regulator-min-microvolt = <1400000>;
211 regulator-max-microvolt = <1400000>;
212 regulator-always-on;
215 reg_usb_h1_vbus: regulator-usb-h1-vbus {
216 compatible = "regulator-fixed";
217 regulator-name = "usb_h1_vbus";
218 regulator-min-microvolt = <5000000>;
219 regulator-max-microvolt = <5000000>;
220 regulator-always-on;
223 reg_usb_otg_vbus: regulator-usb-otg-vbus {
224 compatible = "regulator-fixed";
225 regulator-name = "usb_otg_vbus";
226 regulator-min-microvolt = <5000000>;
227 regulator-max-microvolt = <5000000>;
229 enable-active-high;
233 compatible = "fsl,imx6q-ventana-sgtl5000",
234 "fsl,imx-audio-sgtl5000";
235 model = "sgtl5000-audio";
236 ssi-controller = <&ssi1>;
237 audio-codec = <&sgtl5000>;
238 audio-routing =
242 mux-int-port = <1>;
243 mux-ext-port = <4>;
248 pinctrl-names = "default";
249 pinctrl-0 = <&pinctrl_audmux>;
254 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&pinctrl_ecspi3>;
261 pinctrl-names = "default";
262 pinctrl-0 = <&pinctrl_flexcan>;
267 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
269 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
274 pinctrl-names = "default";
275 pinctrl-0 = <&pinctrl_enet>;
276 phy-mode = "rgmii-id";
277 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
282 ddc-i2c-bus = <&i2c3>;
287 clock-frequency = <100000>;
288 pinctrl-names = "default";
289 pinctrl-0 = <&pinctrl_i2c1>;
295 interrupt-parent = <&gpio1>;
297 interrupt-controller;
298 #interrupt-cells = <1>;
299 #size-cells = <0>;
302 compatible = "gw,gsc-adc";
303 #address-cells = <1>;
304 #size-cells = <0>;
395 gpio-controller;
396 #gpio-cells = <2>;
397 interrupt-parent = <&gsc>;
432 clock-frequency = <100000>;
433 pinctrl-names = "default";
434 pinctrl-0 = <&pinctrl_i2c2>;
440 #sound-dai-cells = <0>;
442 VDDA-supply = <®_1p8v>;
443 VDDIO-supply = <®_3p3v>;
447 compatible = "st,lsm9ds1-magn";
449 pinctrl-names = "default";
450 pinctrl-0 = <&pinctrl_mag>;
451 interrupt-parent = <&gpio5>;
457 pinctrl-names = "default";
458 pinctrl-0 = <&pinctrl_keypad>;
460 interrupt-parent = <&gpio5>;
473 keypad,num-rows = <4>;
474 keypad,num-columns = <4>;
479 pinctrl-names = "default";
480 pinctrl-0 = <&pinctrl_pmic>;
482 interrupt-parent = <&gpio1>;
488 regulator-name = "vddddr";
489 regulator-min-microvolt = <868310>;
490 regulator-max-microvolt = <1684000>;
491 lltc,fb-voltage-divider = <221000 200000>;
492 regulator-ramp-delay = <7000>;
493 regulator-boot-on;
494 regulator-always-on;
499 regulator-name = "vddarm";
500 regulator-min-microvolt = <796551>;
501 regulator-max-microvolt = <1544827>;
502 lltc,fb-voltage-divider = <243000 261000>;
503 regulator-ramp-delay = <7000>;
504 regulator-boot-on;
505 regulator-always-on;
509 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
511 regulator-name = "vdd1p8";
512 regulator-min-microvolt = <1033310>;
513 regulator-max-microvolt = <2004000>;
514 lltc,fb-voltage-divider = <301000 200000>;
515 regulator-ramp-delay = <7000>;
516 regulator-boot-on;
517 regulator-always-on;
520 /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
522 regulator-name = "vdd1p0";
523 regulator-min-microvolt = <950000>;
524 regulator-max-microvolt = <1050000>;
525 lltc,fb-voltage-divider = <78700 200000>;
526 regulator-boot-on;
527 regulator-always-on;
532 regulator-name = "vdd1p8a";
533 regulator-min-microvolt = <1800000>;
534 regulator-max-microvolt = <1800000>;
535 regulator-boot-on;
540 regulator-name = "vdd3p0";
541 regulator-min-microvolt = <3023250>;
542 regulator-max-microvolt = <3023250>;
543 lltc,fb-voltage-divider = <634000 200000>;
544 regulator-boot-on;
545 regulator-always-on;
551 compatible = "st,lsm9ds1-imu";
553 st,drdy-int-pin = <1>;
554 pinctrl-names = "default";
555 pinctrl-0 = <&pinctrl_imu>;
556 interrupt-parent = <&gpio5>;
562 clock-frequency = <100000>;
563 pinctrl-names = "default";
564 pinctrl-0 = <&pinctrl_i2c3>;
570 interrupt-parent = <&gpio5>;
572 wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
577 fsl,dual-channel;
580 lvds-channel@0 {
581 fsl,data-mapping = "spwg";
582 fsl,data-width = <18>;
585 display-timings {
586 native-mode = <&timing0>;
587 timing0: timing-hsd100pxn1 {
588 clock-frequency = <65000000>;
591 hback-porch = <220>;
592 hfront-porch = <40>;
593 vback-porch = <21>;
594 vfront-porch = <7>;
595 hsync-len = <60>;
596 vsync-len = <10>;
603 pinctrl-names = "default";
604 pinctrl-0 = <&pinctrl_pcie>;
605 reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
610 pinctrl-names = "default";
611 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
616 pinctrl-names = "default";
617 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
622 pinctrl-names = "default";
623 pinctrl-0 = <&pinctrl_pwm4>;
632 pinctrl-names = "default";
633 pinctrl-0 = <&pinctrl_uart1>;
634 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
639 pinctrl-names = "default";
640 pinctrl-0 = <&pinctrl_uart2>;
645 pinctrl-names = "default";
646 pinctrl-0 = <&pinctrl_uart5>;
651 vbus-supply = <®_usb_otg_vbus>;
652 pinctrl-names = "default";
653 pinctrl-0 = <&pinctrl_usbotg>;
654 disable-over-current;
659 vbus-supply = <®_usb_h1_vbus>;
660 pinctrl-names = "default";
661 pinctrl-0 = <&pinctrl_usbh1>;
666 pinctrl-names = "default";
667 pinctrl-0 = <&pinctrl_usdhc2>;
668 bus-width = <8>;
669 vmmc-supply = <®_3p3v>;
670 non-removable;
675 pinctrl-names = "default", "state_100mhz", "state_200mhz";
676 pinctrl-0 = <&pinctrl_usdhc3>;
677 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
678 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
679 cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
680 vmmc-supply = <®_3p3v>;
685 pinctrl-names = "default";
686 pinctrl-0 = <&pinctrl_wdog>;
687 fsl,ext-reset-output;
899 pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
912 pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {