nxp/imx/imx6qdl-cubox-i.dtsi

4  * This file is dual-licensed: you can use it either under the terms
41 #include <dt-bindings/input/input.h>
42 #include <dt-bindings/gpio/gpio.h>
51 	ir_recv: ir-receiver {
52 		compatible = "gpio-ir-receiver";
54 		pinctrl-names = "default";
55 		pinctrl-0 = <&pinctrl_cubox_i_ir>;
58 	led-controller {
59 		compatible = "pwm-leds";
60 		pinctrl-names = "default";
61 		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
63 		led-1 {
64 			active-low;
66 			max-brightness = <248>;
71 	v_5v0: regulator-v-5v0 {
72 		compatible = "regulator-fixed";
73 		regulator-always-on;
74 		regulator-max-microvolt = <5000000>;
75 		regulator-min-microvolt = <5000000>;
76 		regulator-name = "v_5v0";
79 	v_usb2: regulator-v-usb2 {
80 		compatible = "regulator-fixed";
81 		enable-active-high;
83 		pinctrl-names = "default";
84 		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
85 		regulator-max-microvolt = <5000000>;
86 		regulator-min-microvolt = <5000000>;
87 		regulator-name = "v_usb2";
88 		vin-supply = <&v_5v0>;
91 	v_usb1: regulator-v-usb1 {
92 		compatible = "regulator-fixed";
93 		enable-active-high;
95 		pinctrl-names = "default";
96 		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
97 		regulator-max-microvolt = <5000000>;
98 		regulator-min-microvolt = <5000000>;
99 		regulator-name = "v_usb1";
100 		vin-supply = <&v_5v0>;
103 	spdif_out: spdif-out {
104 		compatible = "linux,spdif-dit";
105 		#sound-dai-cells = <0>;
108 	sound-spdif {
109 		compatible = "fsl,imx-audio-spdif";
112 		audio-cpu = <&spdif>;
113 		audio-codec = <&spdif_out>;
116 	gpio-keys {
117 		compatible = "gpio-keys";
118 		pinctrl-0 = <&pinctrl_gpio_key>;
119 		pinctrl-names = "default";
130 	pinctrl-names = "default";
131 	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
132 	ddc-i2c-bus = <&i2c2>;
136 &i2c2 {
137 	clock-frequency = <100000>;
138 	pinctrl-names = "default";
139 	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
144 	pinctrl-names = "default";
145 	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
157 		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
158 			fsl,pins = <
163 		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
164 			fsl,pins = <
170 		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
171 			fsl,pins = <
177 		pinctrl_cubox_i_ir: cubox-i-ir {
178 			fsl,pins = <
183 		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
184 			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
187 		pinctrl_cubox_i_spdif: cubox-i-spdif {
188 			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
191 		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
192 			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
195 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
196 			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
199 		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
201 			 * The Cubox-i pulls ID low, but as it's pointless
202 			 * leaving it as a pull-up, even if it is just 10uA.
204 			fsl,pins = <
210 		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
211 			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
214 		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
215 			fsl,pins = <
221 		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
222 			fsl,pins = <
232 		pinctrl_gpio_key: gpio-key {
233 			fsl,pins = <
245 	pinctrl-names = "default";
246 	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
251 	pinctrl-names = "default";
252 	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
253 	vbus-supply = <&v_usb2>;
258 	pinctrl-names = "default";
259 	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
260 	vbus-supply = <&v_usb1>;
265 	pinctrl-names = "default";
266 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
267 	vmmc-supply = <&vcc_3v3>;
268 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
273 	vin-supply = <&v_5v0>;