Lines Matching +full:de +full:- +full:skew
4 * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
6 * This file is dual-licensed: you can use it either under the terms
43 #include <dt-bindings/gpio/gpio.h>
44 #include <dt-bindings/clock/imx6qdl-clock.h>
48 compatible = "pwm-backlight";
50 brightness-levels = <0 4 8 16 32 64 128 255>;
51 default-brightness-level = <7>;
52 enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
55 reg_2p5v: regulator-2p5v {
56 compatible = "regulator-fixed";
57 regulator-name = "2P5V";
58 regulator-min-microvolt = <2500000>;
59 regulator-max-microvolt = <2500000>;
60 regulator-always-on;
63 reg_3p3v: regulator-3p3v {
64 compatible = "regulator-fixed";
65 regulator-name = "3P3V";
66 regulator-min-microvolt = <3300000>;
67 regulator-max-microvolt = <3300000>;
68 regulator-always-on;
71 reg_usbh1_vbus: regulator-usbh1-vbus {
72 compatible = "regulator-fixed";
73 enable-active-high;
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
77 regulator-name = "usb_h1_vbus";
78 regulator-min-microvolt = <5000000>;
79 regulator-max-microvolt = <5000000>;
82 reg_usbotg_vbus: regulator-usbotg-vbus {
83 compatible = "regulator-fixed";
84 enable-active-high;
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
88 regulator-name = "usb_otg_vbus";
89 regulator-min-microvolt = <5000000>;
90 regulator-max-microvolt = <5000000>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_audmux>;
101 pinctrl-names = "default";
102 pinctrl-0 = <&pinctrl_flexcan1>;
107 pinctrl-names = "default";
108 pinctrl-0 = <&pinctrl_flexcan2>;
113 cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_ecspi1>;
122 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_ecspi2>;
129 cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>;
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_ecspi4>;
135 #address-cells = <1>;
136 #size-cells = <1>;
137 compatible = "micron,n25q128a11", "jedec,spi-nor";
138 spi-max-frequency = <20000000>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&pinctrl_i2c1>;
151 interrupt-parent = <&gpio1>;
156 regulator-name = "bcore1";
157 regulator-always-on;
158 regulator-min-microvolt = <300000>;
159 regulator-max-microvolt = <3300000>;
163 regulator-name = "bcore2";
164 regulator-always-on;
165 regulator-min-microvolt = <300000>;
166 regulator-max-microvolt = <3300000>;
170 regulator-name = "bpro";
171 regulator-always-on;
172 regulator-min-microvolt = <300000>;
173 regulator-max-microvolt = <3300000>;
177 regulator-name = "bperi";
178 regulator-always-on;
179 regulator-min-microvolt = <300000>;
180 regulator-max-microvolt = <3300000>;
184 regulator-name = "bmem";
185 regulator-always-on;
186 regulator-min-microvolt = <300000>;
187 regulator-max-microvolt = <3300000>;
191 regulator-name = "ldo2";
192 regulator-always-on;
193 regulator-min-microvolt = <300000>;
194 regulator-max-microvolt = <1800000>;
198 regulator-name = "ldo3";
199 regulator-always-on;
200 regulator-min-microvolt = <300000>;
201 regulator-max-microvolt = <3300000>;
205 regulator-name = "ldo4";
206 regulator-always-on;
207 regulator-min-microvolt = <300000>;
208 regulator-max-microvolt = <3300000>;
212 regulator-name = "ldo5";
213 regulator-always-on;
214 regulator-min-microvolt = <300000>;
215 regulator-max-microvolt = <3300000>;
219 regulator-name = "ldo6";
220 regulator-always-on;
221 regulator-min-microvolt = <300000>;
222 regulator-max-microvolt = <3300000>;
226 regulator-name = "ldo7";
227 regulator-always-on;
228 regulator-min-microvolt = <300000>;
229 regulator-max-microvolt = <3300000>;
233 regulator-name = "ldo8";
234 regulator-always-on;
235 regulator-min-microvolt = <300000>;
236 regulator-max-microvolt = <3300000>;
240 regulator-name = "ldo9";
241 regulator-always-on;
242 regulator-min-microvolt = <300000>;
243 regulator-max-microvolt = <3300000>;
247 regulator-name = "ldo10";
248 regulator-always-on;
249 regulator-min-microvolt = <300000>;
250 regulator-max-microvolt = <3300000>;
254 regulator-name = "ldo11";
255 regulator-always-on;
256 regulator-min-microvolt = <300000>;
257 regulator-max-microvolt = <3300000>;
261 regulator-name = "bio";
262 regulator-always-on;
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
276 pinctrl-names = "default";
277 pinctrl-0 = <&pinctrl_i2c2>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_i2c3>;
289 #gpio-cells = <2>;
290 gpio-controller;
300 pinctrl-names = "default";
301 pinctrl-0 = <&pinctrl_i2c4>;
316 pinctrl-names = "default";
317 pinctrl-0 = <&pinctrl_enet>;
318 phy-mode = "rgmii";
319 phy-handle = <ðphy>;
320 phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
324 #address-cells = <1>;
325 #size-cells = <0>;
327 ethphy: ethernet-phy {
328 compatible = "ethernet-phy-ieee802.3-c22";
329 txd0-skew-ps = <0>;
330 txd1-skew-ps = <0>;
331 txd2-skew-ps = <0>;
332 txd3-skew-ps = <0>;
338 pinctrl-names = "default";
339 pinctrl-0 = <&pinctrl_gpmi_nand>;
344 reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
349 pinctrl-names = "default";
350 pinctrl-0 = <&pinctrl_pwm1>;
355 pinctrl-names = "default";
356 pinctrl-0 = <&pinctrl_uart1>;
357 uart-has-rtscts;
362 pinctrl-names = "default";
363 pinctrl-0 = <&pinctrl_uart2>;
368 pinctrl-names = "default";
369 pinctrl-0 = <&pinctrl_uart3>;
370 uart-has-rtscts;
375 pinctrl-names = "default";
376 pinctrl-0 = <&pinctrl_uart4>;
381 vbus-supply = <®_usbh1_vbus>;
387 vbus-supply = <®_usbotg_vbus>;
388 pinctrl-names = "default";
389 pinctrl-0 = <&pinctrl_usbotg>;
390 disable-over-current;
396 pinctrl-names = "default";
397 pinctrl-0 = <&pinctrl_usdhc1>;
398 cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
399 no-1-8-v;
404 pinctrl-names = "default";
405 pinctrl-0 = <&pinctrl_usdhc2>;
406 cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
407 wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
408 no-1-8-v;
413 pinctrl-names = "default";
414 pinctrl-0 = <&pinctrl_gpio>;
502 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
602 pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
606 pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {