nxp/imx/imx6q-utilite-pro.dts

10  * This file is dual-licensed: you can use it either under the terms
49 #include <dt-bindings/input/input.h>
50 #include "imx6q-cm-fx6.dts"
54 	compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
66 			#address-cells = <1>;
67 			#size-cells = <0>;
73 					remote-endpoint = <&parallel_display_out>;
81 					remote-endpoint = <&hdmi_connector_in>;
87 	gpio-keys {
88 		compatible = "gpio-keys";
89 		pinctrl-names = "default";
90 		pinctrl-0 = <&pinctrl_gpio_keys>;
92 		key-power {
96 			wakeup-source;
100 	hdmi-connector {
101 		compatible = "hdmi-connector";
102 		pinctrl-names = "default";
103 		pinctrl-0 = <&pinctrl_hpd>;
105 		ddc-i2c-bus = <&i2c_dvi_ddc>;
106 		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
110 				remote-endpoint = <&tfp410_out>;
116 		compatible = "i2c-mux-gpio";
117 		pinctrl-names = "default";
118 		pinctrl-0 = <&pinctrl_i2c1mux>;
119 		#address-cells = <1>;
120 		#size-cells = <0>;
122 		mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
123 		i2c-parent = <&i2c1>;
127 			#address-cells = <1>;
128 			#size-cells = <0>;
144 			#address-cells = <1>;
145 			#size-cells = <0>;
149 	parallel-display {
150 		compatible = "fsl,imx-parallel-display";
151 		#address-cells = <1>;
152 		#size-cells = <0>;
153 		pinctrl-names = "default";
154 		pinctrl-0 = <&pinctrl_ipu1>;
156 		interface-pix-fmt = "rgb24";
162 				remote-endpoint = <&ipu1_di0_disp0>;
170 				remote-endpoint = <&tfp410_in>;
180  * SoC-internal Designware HDMI encoder forcing the latter to be connected to
183 /delete-node/&ipu1_di0_hdmi;
184 /delete-node/&hdmi_mux_0;
185 /delete-node/&ipu1_di1_hdmi;
186 /delete-node/&hdmi_mux_1;
189 	pinctrl-names = "default";
190 	pinctrl-0 = <&pinctrl_hdmicec>;
191 	ddc-i2c-bus = <&i2c2>;
196 	pinctrl-names = "default";
197 	pinctrl-0 = <&pinctrl_i2c1>;
202 	pinctrl-names = "default";
203 	pinctrl-0 = <&pinctrl_i2c2>;
299 	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
310 	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
323 	remote-endpoint = <&parallel_display_in>;
326 &pcie {
327 	pcie@0,0 {
329 		#address-cells = <3>;
330 		#size-cells = <2>;
332 		/* non-removable i211 ethernet card */
340 	pinctrl-names = "default";
341 	pinctrl-0 = <&pinctrl_uart2>;
342 	uart-has-rtscts;
347 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
348 	pinctrl-0 = <&pinctrl_usdhc3>;
349 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
350 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
351 	no-1-8-v;
352 	broken-cd;
353 	keep-power-in-suspend;