nxp/imx/imx6q-tbs2910.dts

1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
5 /dts-v1/;
7 #include "imx6q.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
13 	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
16 		stdout-path = &uart1;
23 		/delete-property/ mmc3;
32 		compatible = "gpio-fan";
33 		pinctrl-names = "default";
34 		pinctrl-0 = <&pinctrl_gpio_fan>;
36 		gpio-fan,speed-map = <0    0
41 		compatible = "gpio-ir-receiver";
43 		pinctrl-names = "default";
44 		pinctrl-0 = <&pinctrl_ir>;
48 		compatible = "gpio-leds";
49 		pinctrl-names = "default";
50 		pinctrl-0 = <&pinctrl_gpio_leds>;
52 		led-blue {
55 			default-state = "keep";
59 	reg_2p5v: regulator-2p5v {
60 		compatible = "regulator-fixed";
61 		regulator-name = "2P5V";
62 		regulator-min-microvolt = <2500000>;
63 		regulator-max-microvolt = <2500000>;
66 	reg_3p3v: regulator-3p3v {
67 		compatible = "regulator-fixed";
68 		regulator-name = "3P3V";
69 		regulator-min-microvolt = <3300000>;
70 		regulator-max-microvolt = <3300000>;
73 	reg_5p0v: regulator-5p0v {
74 		compatible = "regulator-fixed";
75 		regulator-name = "5P0V";
76 		regulator-min-microvolt = <5000000>;
77 		regulator-max-microvolt = <5000000>;
80 	sound-sgtl5000 {
81 		audio-codec = <&sgtl5000>;
82 		audio-routing =
86 		compatible = "fsl,imx-audio-sgtl5000";
87 		model = "On-board Codec";
88 		mux-ext-port = <3>;
89 		mux-int-port = <1>;
90 		ssi-controller = <&ssi1>;
93 	spdif_out: spdif-out {
94 		compatible = "linux,spdif-dit";
95 		#sound-dai-cells = <0>;
98 	sound-spdif {
99 		compatible = "fsl,imx-audio-spdif";
100 		model = "On-board SPDIF";
101 		audio-cpu = <&spdif>;
102 		audio-codec = <&spdif_out>;
111 	pinctrl-names = "default";
112 	pinctrl-0 = <&pinctrl_enet>;
113 	phy-mode = "rgmii-id";
114 	phy-handle = <&phy>;
118 		#address-cells = <1>;
119 		#size-cells = <0>;
121 		phy: ethernet-phy@4 {
123 			qca,clk-out-frequency = <125000000>;
124 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
125 			reset-assert-us = <10000>;
131 	pinctrl-names = "default";
132 	pinctrl-0 = <&pinctrl_hdmi>;
133 	ddc-i2c-bus = <&i2c2>;
138 	clock-frequency = <100000>;
139 	pinctrl-names = "default";
140 	pinctrl-0 = <&pinctrl_i2c1>;
146 		pinctrl-names = "default";
147 		pinctrl-0 = <&pinctrl_sgtl5000>;
149 		#sound-dai-cells = <0>;
150 		VDDA-supply = <&reg_2p5v>;
151 		VDDIO-supply = <&reg_3p3v>;
156 	clock-frequency = <100000>;
157 	pinctrl-names = "default";
158 	pinctrl-0 = <&pinctrl_i2c2>;
163 	clock-frequency = <100000>;
164 	pinctrl-names = "default";
165 	pinctrl-0 = <&pinctrl_i2c3>;
174 &pcie {
175 	pinctrl-names = "default";
176 	pinctrl-0 = <&pinctrl_pcie>;
177 	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
182 	fsl,transmit-level-mV = <1104>;
183 	fsl,transmit-boost-mdB = <3330>;
184 	fsl,transmit-atten-16ths = <16>;
185 	fsl,receive-eq-mdB = <3000>;
194 	pinctrl-names = "default";
195 	pinctrl-0 = <&pinctrl_spdif>;
204 	pinctrl-names = "default";
205 	pinctrl-0 = <&pinctrl_uart1>;
210 	pinctrl-names = "default";
211 	pinctrl-0 = <&pinctrl_uart2>;
216 	vbus-supply = <&reg_5p0v>;
221 	vbus-supply = <&reg_5p0v>;
222 	pinctrl-names = "default";
223 	pinctrl-0 = <&pinctrl_usbotg>;
224 	disable-over-current;
229 	pinctrl-names = "default";
230 	pinctrl-0 = <&pinctrl_usdhc2>;
231 	bus-width = <4>;
232 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
233 	vmmc-supply = <&reg_3p3v>;
234 	vqmmc-supply = <&reg_3p3v>;
235 	voltage-ranges = <3300 3300>;
236 	no-1-8-v;
241 	pinctrl-names = "default";
242 	pinctrl-0 = <&pinctrl_usdhc3>;
243 	bus-width = <4>;
244 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
245 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
246 	vmmc-supply = <&reg_3p3v>;
247 	vqmmc-supply = <&reg_3p3v>;
248 	voltage-ranges = <3300 3300>;
249 	no-1-8-v;
254 	pinctrl-names = "default";
255 	pinctrl-0 = <&pinctrl_usdhc4>;
256 	bus-width = <8>;
257 	vmmc-supply = <&reg_3p3v>;
258 	vqmmc-supply = <&reg_3p3v>;
259 	voltage-ranges = <3300 3300>;
260 	non-removable;
261 	no-1-8-v;