nxp/imx/imx6q-prtwd2.dts

1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "imx6q.dtsi"
8 #include "imx6qdl-prti6q.dtsi"
9 #include <dt-bindings/leds/common.h>
13 	compatible = "prt,prtwd2", "fsl,imx6q";
25 	clk50m_phy: phy-clock {
26 		compatible = "fixed-clock";
27 		#clock-cells = <0>;
28 		clock-frequency = <50000000>;
29 		clock-output-names = "enet_ref_pad";
33 		compatible = "mmc-pwrseq-simple";
34 		pinctrl-names = "default";
35 		pinctrl-0 = <&pinctrl_wifi_npd>;
36 		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
41 		compatible = "i2c-gpio";
42 		pinctrl-names = "default";
43 		pinctrl-0 = <&pinctrl_i2c4>;
44 		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
45 		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
46 		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
47 		i2c-gpio,scl-output-only;
48 		#address-cells = <1>;
49 		#size-cells = <0>;
54 	pinctrl-names = "default";
55 	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
61 	clock-names = "enet_ref_pad";
62 	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
63 	assigned-clock-parents = <&clk50m_phy>;
67 	pinctrl-names = "default";
68 	pinctrl-0 = <&pinctrl_enet>;
69 	phy-mode = "rmii";
72 	fixed-link {
75 		full-duplex;
83 		#address-cells = <1>;
84 		#size-cells = <0>;
117 	pinctrl-names = "default";
118 	pinctrl-0 = <&pinctrl_usdhc2>;
119 	no-1-8-v;
120 	non-removable;
121 	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
122 	#address-cells = <1>;
123 	#size-cells = <0>;
127 		compatible = "brcm,bcm4329-fmac";
133 	pinctrl-names = "default";
134 	pinctrl-0 = <&pinctrl_usb_eth_chg>;
171 			/* USB charging control */