Lines Matching +full:stmpe +full:- +full:gpio
1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
12 model = "Data Modul eDM-QMX6 Board";
13 compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
16 stdout-path = &uart2;
22 stmpe-i2c0 = &stmpe1;
23 stmpe-i2c1 = &stmpe2;
31 reg_3p3v: regulator-3p3v {
32 compatible = "regulator-fixed";
33 regulator-name = "3P3V";
34 regulator-min-microvolt = <3300000>;
35 regulator-max-microvolt = <3300000>;
36 regulator-always-on;
39 reg_usb_otg_switch: regulator-usb-otg-switch {
40 compatible = "regulator-fixed";
41 regulator-name = "usb_otg_switch";
42 regulator-min-microvolt = <5000000>;
43 regulator-max-microvolt = <5000000>;
44 gpio = <&gpio7 12 0>;
45 regulator-boot-on;
46 regulator-always-on;
49 reg_usb_host1: regulator-usb-host1 {
50 compatible = "regulator-fixed";
51 regulator-name = "usb_host1_en";
52 regulator-min-microvolt = <3300000>;
53 regulator-max-microvolt = <3300000>;
54 gpio = <&gpio3 31 0>;
55 enable-active-high;
58 gpio-leds {
59 compatible = "gpio-leds";
61 led-blue {
64 linux,default-trigger = "heartbeat";
67 led-green {
72 led-pink {
77 led-red {
85 pinctrl-names = "default";
86 pinctrl-0 = <&pinctrl_can1>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&pinctrl_ecspi5>;
93 cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
97 compatible = "m25p80", "jedec,spi-nor";
98 spi-max-frequency = <40000000>;
104 pinctrl-names = "default";
105 pinctrl-0 = <&pinctrl_enet>;
106 phy-mode = "rgmii-id";
107 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
108 phy-supply = <&vgen2_1v2_eth>;
113 clock-frequency = <100000>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&pinctrl_i2c1>;
120 clock-frequency = <100000>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pinctrl_i2c2
131 interrupt-parent = <&gpio3>;
136 regulator-min-microvolt = <300000>;
137 regulator-max-microvolt = <1875000>;
138 regulator-boot-on;
139 regulator-always-on;
143 regulator-min-microvolt = <300000>;
144 regulator-max-microvolt = <1875000>;
145 regulator-boot-on;
146 regulator-always-on;
150 regulator-min-microvolt = <800000>;
151 regulator-max-microvolt = <3300000>;
152 regulator-boot-on;
153 regulator-always-on;
157 regulator-min-microvolt = <400000>;
158 regulator-max-microvolt = <1975000>;
159 regulator-boot-on;
160 regulator-always-on;
164 regulator-min-microvolt = <400000>;
165 regulator-max-microvolt = <1975000>;
166 regulator-boot-on;
167 regulator-always-on;
171 regulator-min-microvolt = <400000>;
172 regulator-max-microvolt = <1975000>;
173 regulator-always-on;
177 regulator-min-microvolt = <5000000>;
178 regulator-max-microvolt = <5150000>;
179 regulator-always-on;
183 regulator-min-microvolt = <1000000>;
184 regulator-max-microvolt = <3000000>;
185 regulator-boot-on;
186 regulator-always-on;
190 regulator-boot-on;
191 regulator-always-on;
195 regulator-min-microvolt = <800000>;
196 regulator-max-microvolt = <1550000>;
200 regulator-min-microvolt = <800000>;
201 regulator-max-microvolt = <1550000>;
205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvolt = <3300000>;
207 regulator-boot-on;
208 regulator-always-on;
212 regulator-min-microvolt = <1800000>;
213 regulator-max-microvolt = <3300000>;
214 regulator-always-on;
218 regulator-min-microvolt = <1800000>;
219 regulator-max-microvolt = <3300000>;
220 regulator-always-on;
224 regulator-min-microvolt = <1800000>;
225 regulator-max-microvolt = <3300000>;
226 regulator-always-on;
235 interrupt-parent = <&gpio3>;
236 vcc-supply = <&sw2_reg>;
237 vio-supply = <&sw2_reg>;
240 #gpio-cells = <2>;
241 compatible = "st,stmpe-gpio";
249 interrupt-parent = <&gpio5>;
250 vcc-supply = <&sw2_reg>;
251 vio-supply = <&sw2_reg>;
254 #gpio-cells = <2>;
255 compatible = "st,stmpe-gpio";
276 clock-frequency = <100000>;
277 pinctrl-names = "default";
278 pinctrl-0 = <&pinctrl_i2c3>;
283 pinctrl-names = "default";
284 pinctrl-0 = <&pinctrl_hog>;
286 imx6q-dmo-edmqmx6 {
301 pinctrl_ecspi5: ecspi5rp-1 {
422 pinctrl-names = "default";
423 pinctrl-0 = <&pinctrl_pcie>;
424 reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
433 pinctrl-names = "default";
434 pinctrl-0 = <&pinctrl_uart1>;
439 pinctrl-names = "default";
440 pinctrl-0 = <&pinctrl_uart2>;
445 vbus-supply = <®_usb_host1>;
446 disable-over-current;
452 pinctrl-names = "default";
453 pinctrl-0 = <&pinctrl_usbotg>;
454 disable-over-current;
459 pinctrl-names = "default";
460 pinctrl-0 = <&pinctrl_usdhc3>;
461 vmmc-supply = <®_3p3v>;
466 pinctrl-names = "default";
467 pinctrl-0 = <&pinctrl_usdhc4>;
468 vmmc-supply = <®_3p3v>;
469 non-removable;
470 bus-width = <8>;