Lines Matching +full:err006687 +full:- +full:workaround +full:- +full:present
1 // SPDX-License-Identifier: GPL-2.0-only
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
12 compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
20 stdout-path = "serial1:115200n8";
24 compatible = "gpio-leds";
25 pinctrl-names = "default";
26 pinctrl-0 = <&pinctrl_led>;
28 led0: led-user1 {
31 default-state = "on";
32 linux,default-trigger = "heartbeat";
35 led1: led-user2 {
38 default-state = "off";
43 compatible = "fsl,imx-audio-sgtl5000";
44 model = "imx6-riotboard-sgtl5000";
45 ssi-controller = <&ssi1>;
46 audio-codec = <&codec>;
47 audio-routing =
51 mux-int-port = <1>;
52 mux-ext-port = <3>;
55 reg_2p5v: regulator-2p5v {
56 compatible = "regulator-fixed";
57 regulator-name = "2P5V";
58 regulator-min-microvolt = <2500000>;
59 regulator-max-microvolt = <2500000>;
62 reg_3p3v: regulator-3p3v {
63 compatible = "regulator-fixed";
64 regulator-name = "3P3V";
65 regulator-min-microvolt = <3300000>;
66 regulator-max-microvolt = <3300000>;
69 reg_usb_otg_vbus: regulator-usbotgvbus {
70 compatible = "regulator-fixed";
71 regulator-name = "usb_otg_vbus";
72 regulator-min-microvolt = <5000000>;
73 regulator-max-microvolt = <5000000>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&pinctrl_audmux>;
85 fsl,pmic-stby-poweroff;
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_enet>;
91 phy-mode = "rgmii-id";
92 phy-handle = <&rgmii_phy>;
93 /delete-property/ interrupts;
94 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
96 fsl,err006687-workaround-present;
100 #address-cells = <1>;
101 #size-cells = <0>;
104 rgmii_phy: ethernet-phy@4 {
106 interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
107 reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
108 reset-assert-us = <10000>;
109 reset-deassert-us = <1000>;
110 qca,smarteee-tw-us-1g = <24>;
111 qca,clk-out-frequency = <125000000>;
117 gpio-line-names =
126 gpio-line-names =
134 gpio-line-names =
144 gpio-line-names =
154 gpio-line-names =
162 ddc-i2c-bus = <&i2c2>;
167 clock-frequency = <100000>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_i2c1>;
175 #sound-dai-cells = <0>;
177 VDDA-supply = <®_2p5v>;
178 VDDIO-supply = <®_3p3v>;
184 interrupt-parent = <&gpio5>;
186 fsl,pmic-stby-poweroff;
190 regulator-min-microvolt = <300000>;
191 regulator-max-microvolt = <1875000>;
192 regulator-always-on;
196 regulator-min-microvolt = <300000>;
197 regulator-max-microvolt = <1875000>;
198 regulator-always-on;
202 regulator-min-microvolt = <800000>;
203 regulator-max-microvolt = <3300000>;
204 regulator-always-on;
208 regulator-min-microvolt = <400000>;
209 regulator-max-microvolt = <1975000>;
210 regulator-always-on;
214 regulator-min-microvolt = <400000>;
215 regulator-max-microvolt = <1975000>;
216 regulator-always-on;
220 regulator-min-microvolt = <400000>;
221 regulator-max-microvolt = <1975000>;
222 regulator-always-on;
226 regulator-min-microvolt = <5000000>;
227 regulator-max-microvolt = <5150000>;
231 regulator-min-microvolt = <1500000>;
232 regulator-max-microvolt = <3000000>;
233 regulator-always-on;
237 regulator-boot-on;
238 regulator-always-on;
242 regulator-min-microvolt = <800000>;
243 regulator-max-microvolt = <1550000>;
247 regulator-min-microvolt = <800000>;
248 regulator-max-microvolt = <1550000>;
249 regulator-always-on;
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <3300000>;
257 regulator-min-microvolt = <1800000>;
258 regulator-max-microvolt = <3300000>;
259 regulator-always-on;
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <3300000>;
265 regulator-always-on;
269 regulator-min-microvolt = <1800000>;
270 regulator-max-microvolt = <3300000>;
271 regulator-always-on;
278 clock-frequency = <100000>;
279 pinctrl-names = "default";
280 pinctrl-0 = <&pinctrl_i2c2>;
285 clock-frequency = <100000>;
286 pinctrl-names = "default";
287 pinctrl-0 = <&pinctrl_i2c4>;
293 pinctrl-names = "default";
294 pinctrl-0 = <&pinctrl_pwm1>;
299 pinctrl-names = "default";
300 pinctrl-0 = <&pinctrl_pwm2>;
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_pwm3>;
311 pinctrl-names = "default";
312 pinctrl-0 = <&pinctrl_pwm4>;
321 pinctrl-names = "default";
322 pinctrl-0 = <&pinctrl_uart1>;
327 pinctrl-names = "default";
328 pinctrl-0 = <&pinctrl_uart2>;
333 pinctrl-names = "default";
334 pinctrl-0 = <&pinctrl_uart3>;
339 pinctrl-names = "default";
340 pinctrl-0 = <&pinctrl_uart4>;
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_uart5>;
352 disable-over-current;
357 vbus-supply = <®_usb_otg_vbus>;
358 pinctrl-names = "default";
359 pinctrl-0 = <&pinctrl_usbotg>;
360 disable-over-current;
366 pinctrl-names = "default";
367 pinctrl-0 = <&pinctrl_usdhc2>;
368 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
369 wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
370 vmmc-supply = <®_3p3v>;
375 pinctrl-names = "default";
376 pinctrl-0 = <&pinctrl_usdhc3>;
377 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
378 wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
379 vmmc-supply = <®_3p3v>;
384 pinctrl-names = "default";
385 pinctrl-0 = <&pinctrl_usdhc4>;
386 vmmc-supply = <®_3p3v>;
387 non-removable;
392 pinctrl-names = "default";
394 imx6-riotboard {
444 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
451 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */