Lines Matching +full:dout +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
15 compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
18 stdout-path = &uart3;
26 rmii_clk: clock-rmii {
28 compatible = "fixed-clock";
29 #clock-cells = <0>;
30 clock-frequency = <50000000>;
31 clock-output-names = "enet_ref_pad";
34 reg_usb_h1_vbus: regulator-usb-h1-vbus {
35 pinctrl-names = "default";
36 pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
37 compatible = "regulator-fixed";
38 regulator-name = "usb_h1_vbus";
39 regulator-min-microvolt = <5000000>;
40 regulator-max-microvolt = <5000000>;
42 enable-active-high;
46 compatible = "eckelmann,siox-gpio";
47 pinctrl-names = "default";
48 pinctrl-0 = <&pinctrl_siox>;
49 din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
50 dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
51 dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
52 dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_flexcan1>;
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_flexcan2>;
70 clock-names = "enet_ref_pad";
71 assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
72 assigned-clock-parents = <&rmii_clk>;
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_ecspi2>;
78 cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
84 spi-max-frequency = <15000000>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_ecspi1>;
91 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
95 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
97 spi-max-frequency = <10000000>;
102 gpio-line-names = "buzzer", "", "", "", "", "", "", "",
109 gpio-line-names = "", "", "", "", "", "", "", "in2",
116 gpio-line-names = "", "", "", "", "", "", "", "",
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_i2c1>;
127 temperature-sensor@49 {
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_hog>;
227 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */
303 pinctrl-names = "default";
304 pinctrl-0 = <&pinctrl_enet>;
305 phy-mode = "rmii";
306 phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
307 phy-handle = <&phy>;
311 #address-cells = <1>;
312 #size-cells = <0>;
314 phy: ethernet-phy@1 {
315 compatible = "ethernet-phy-ieee802.3-c22";
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_pcie>;
324 reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_uart1_dte>;
331 uart-has-rtscts;
332 fsl,dte-mode;
333 dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
334 dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
335 dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
340 pinctrl-names = "default";
341 pinctrl-0 = <&pinctrl_uart2_dte>;
342 uart-has-rtscts;
343 fsl,dte-mode;
344 dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
345 dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
346 dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_uart3_dce>;
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_uart4_dce>;
359 rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
364 pinctrl-names = "default";
365 pinctrl-0 = <&pinctrl_uart5_dce>;
366 rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
371 pinctrl-names = "default";
372 pinctrl-0 = <&pinctrl_usbh1>;
373 vbus-supply = <®_usb_h1_vbus>;
383 pinctrl-names = "default";
384 pinctrl-0 = <&pinctrl_usdhc3>;
385 bus-width = <8>;
386 non-removable;