nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts

1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "imx51-eukrea-cpuimx51.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
16 			compatible = "fixed-clock";
17 			#clock-cells = <0>;
18 			clock-frequency = <24000000>;
23 		compatible = "gpio-keys";
24 		pinctrl-names = "default";
25 		pinctrl-0 = <&pinctrl_gpiokeys_1>;
27 		button-1 {
31 			wakeup-source;
32 			linux,input-type = <1>;
37 		compatible = "gpio-leds";
38 		pinctrl-names = "default";
39 		pinctrl-0 = <&pinctrl_gpioled>;
44 			linux,default-trigger = "heartbeat";
48 	reg_can: regulator-can {
49 		compatible = "regulator-fixed";
50 		regulator-name = "CAN_RST";
51 		regulator-min-microvolt = <3300000>;
52 		regulator-max-microvolt = <3300000>;
54 		startup-delay-us = <20000>;
55 		enable-active-high;
59 		compatible = "eukrea,asoc-tlv320";
60 		eukrea,model = "imx51-eukrea-tlv320aic23";
61 		ssi-controller = <&ssi2>;
62 		fsl,mux-int-port = <2>;
63 		fsl,mux-ext-port = <3>;
67 		compatible = "usb-nop-xceiv";
69 		clock-names = "main_clk";
70 		clock-frequency = <19200000>;
71 		#phy-cells = <0>;
76 	pinctrl-names = "default";
77 	pinctrl-0 = <&pinctrl_audmux>;
82 	pinctrl-names = "default";
83 	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
84 	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
89 	pinctrl-names = "default";
90 	pinctrl-0 = <&pinctrl_ecspi1>;
91 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
95 		pinctrl-names = "default";
96 		pinctrl-0 = <&pinctrl_can>;
100 		spi-max-frequency = <10000000>;
101 		interrupt-parent = <&gpio1>;
103 		vdd-supply = <&reg_can>;
115 	imx51-eukrea {
174 		pinctrl_backlight_1: backlightgrp-1 {
186 		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
192 		pinctrl_gpioled: gpioledgrp-1 {
221 		pinctrl_usbh1_vbus: usbh1-vbusgrp {
230 	codec-handle = <&tlv320aic23>;
235 	pinctrl-names = "default";
236 	pinctrl-0 = <&pinctrl_uart1>;
237 	uart-has-rtscts;
242 	pinctrl-names = "default";
243 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
244 	uart-has-rtscts;
249 	pinctrl-names = "default";
250 	pinctrl-0 = <&pinctrl_usbh1>;
264 	pinctrl-names = "default";
265 	pinctrl-0 = <&pinctrl_usbh1_vbus>;
266 	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;