Lines Matching +full:keep +full:- +full:vref +full:- +full:on
1 // SPDX-License-Identifier: GPL-2.0-or-later
6 #include "imx27-eukrea-cpuimx27.dtsi"
10 compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
12 display0: CMO-QVGA {
13 model = "CMO-QVGA";
14 bits-per-pixel = <16>;
17 display-timings {
18 native-mode = <&timing0>;
20 clock-frequency = <6500000>;
23 hback-porch = <20>;
24 hsync-len = <30>;
25 hfront-porch = <38>;
26 vback-porch = <4>;
27 vsync-len = <3>;
28 vfront-porch = <15>;
34 compatible = "gpio-backlight";
35 pinctrl-names = "default";
36 pinctrl-0 = <&pinctrl_backlight>;
41 compatible = "gpio-leds";
42 pinctrl-names = "default";
43 pinctrl-0 = <&pinctrl_gpioleds>;
48 linux,default-trigger = "heartbeat";
57 reg_lcd: regulator-0 {
58 compatible = "regulator-fixed";
59 pinctrl-names = "default";
60 pinctrl-0 = <&pinctrl_lcdreg>;
61 regulator-name = "LCD";
62 regulator-min-microvolt = <5000000>;
63 regulator-max-microvolt = <5000000>;
65 enable-active-high;
70 pinctrl-0 = <&pinctrl_cspi1>;
71 cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_touch>;
80 spi-cpol;
81 spi-max-frequency = <1500000>;
82 ti,keep-vref-on;
87 pinctrl-names = "default";
88 pinctrl-0 = <&pinctrl_imxfb>;
90 lcd-supply = <®_lcd>;
115 pinctrl-names = "default";
116 pinctrl-0 = <&pinctrl_sdhc1>;
117 bus-width = <4>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_ssi1>;
124 codec-handle = <&codec>;
129 uart-has-rtscts;
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_uart1>;
136 uart-has-rtscts;
137 pinctrl-names = "default";
138 pinctrl-0 = <&pinctrl_uart2>;
143 uart-has-rtscts;
144 pinctrl-names = "default";
145 pinctrl-0 = <&pinctrl_uart3>;
150 imx27-eukrea-cpuimx27-baseboard {