dts/microchip/sama5d3xmb_cmp.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
10 	compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
15 				pinctrl-names = "default";
16 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
20 					bus-width = <4>;
21 					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
30 					spi-max-frequency = <50000000>;
36 				atmel,clk-from-rk-pin;
49 					clock-names = "mclk";
57 					pinctrl-names = "default";
58 					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
59 					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
60 					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
63 					clock-names = "xvclk";
64 					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
65 					assigned-clock-rates = <25000000>;
69 							remote-endpoint = <&isi_0>;
70 							bus-width = <8>;
78 				pinctrl-names = "default";
79 				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
86 						remote-endpoint = <&ov2640_0>;
87 						bus-width = <8>;
88 						vsync-active = <1>;
89 						hsync-active = <1>;
95 				pinctrl-names = "default";
96 				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
100 					bus-width = <4>;
101 					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
106 				pinctrl-names = "default", "sleep";
107 				pinctrl-0 = <
115 				pinctrl-1 = <
127 				phy-mode = "rmii";
129 				#address-cells = <1>;
130 				#size-cells = <0>;
131 				phy0: ethernet-phy@1 {
132 					/*interrupt-parent = <&pioE>;*/
187 					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
192 					pinctrl_sensor_reset: sensor_reset-0 {
197 					pinctrl_sensor_power: sensor_power-0 {
220 			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
221 			pinctrl-names = "default";
222 			pinctrl-0 = <&pinctrl_usba_vbus>;
228 		compatible = "atmel,asoc-wm8904";
229 		pinctrl-names = "default";
230 		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
233 		atmel,audio-routing =
241 		atmel,ssc-controller = <&ssc0>;
242 		atmel,audio-codec = <&wm8904>;
249 		compatible = "gpio-keys";
252 		#address-cells = <1>;
253 		#size-cells = <0>;
254 		pinctrl-names = "default";
255 		pinctrl-0 = <&pinctrl_gpio_keys>;
259 			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
261 			wakeup-source;