dts/microchip/sama5d3xcm_cmp.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
9 	compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
12 		stdout-path = "serial0:115200n8";
21 			clock-frequency = <32768>;
25 			clock-frequency = <12000000>;
32 				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
37 					compatible = "atmel,tcb-timer";
42 					compatible = "atmel,tcb-timer";
48 				phy-mode = "rgmii";
49 				#address-cells = <1>;
50 				#size-cells = <0>;
52 				ethernet-phy@1 {
54 					interrupt-parent = <&pioB>;
56 					txen-skew-ps = <800>;
57 					txc-skew-ps = <3000>;
58 					rxdv-skew-ps = <400>;
59 					rxc-skew-ps = <3000>;
60 					rxd0-skew-ps = <400>;
61 					rxd1-skew-ps = <400>;
62 					rxd2-skew-ps = <400>;
63 					rxd3-skew-ps = <400>;
66 				ethernet-phy@7 {
68 					interrupt-parent = <&pioB>;
70 					txen-skew-ps = <800>;
71 					txc-skew-ps = <3000>;
72 					rxdv-skew-ps = <400>;
73 					rxc-skew-ps = <3000>;
74 					rxd0-skew-ps = <400>;
75 					rxd1-skew-ps = <400>;
76 					rxd2-skew-ps = <400>;
77 					rxd3-skew-ps = <400>;
83 					compatible = "active-semi,act8865";
89 							regulator-name = "VCC_1V8";
90 							regulator-min-microvolt = <1800000>;
91 							regulator-max-microvolt = <1800000>;
92 							regulator-always-on;
96 							regulator-name = "VCC_1V2";
97 							regulator-min-microvolt = <1100000>;
98 							regulator-max-microvolt = <1300000>;
99 							regulator-always-on;
103 							regulator-name = "VCC_3V3";
104 							regulator-min-microvolt = <3300000>;
105 							regulator-max-microvolt = <3300000>;
106 							regulator-always-on;
110 							regulator-name = "VDDANA";
111 							regulator-min-microvolt = <3300000>;
112 							regulator-max-microvolt = <3300000>;
113 							regulator-always-on;
117 							regulator-name = "FUSE_2V5";
118 							regulator-min-microvolt = <2500000>;
119 							regulator-max-microvolt = <2500000>;
127 			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
128 			pinctrl-names = "default";
131 			nand_controller: nand-controller {
137 					nand-bus-width = <8>;
138 					nand-ecc-mode = "hw";
139 					nand-ecc-strength = <4>;
140 					nand-ecc-step-size = <512>;
141 					nand-on-flash-bbt;
145 						compatible = "fixed-partitions";
146 						#address-cells = <1>;
147 						#size-cells = <1>;
154 						bootloader@40000 {
155 							label = "bootloader";
160 							label = "bootloader env";
185 		compatible = "gpio-leds";
187 		led-d2 {
190 			linux,default-trigger = "heartbeat";