dts/microchip/at91sam9x5ek.dtsi

1 // SPDX-License-Identifier: GPL-2.0-or-later
3  * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
11 	model = "Atmel AT91SAM9X5-EK";
16 		stdout-path = "serial0:115200n8";
20 		compatible = "atmel,sam9x5-wm8731-audio";
24 		atmel,audio-routing =
25 			"Headphone Jack", "RHPOUT",
26 			"Headphone Jack", "LHPOUT",
27 			"LLINEIN", "Line In Jack",
28 			"RLINEIN", "Line In Jack";
30 		atmel,ssc-controller = <&ssc0>;
31 		atmel,audio-codec = <&wm8731>;
36 	atmel,adc-ts-wires = <4>;
37 	atmel,adc-ts-pressure-threshold = <10000>;
42 	atmel,use-dma-rx;
43 	atmel,use-dma-tx;
57 	pinctrl-0 = <
61 	pinctrl-names = "default";
66 		bus-width = <4>;
67 		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
72 	pinctrl-0 = <
76 	pinctrl-names = "default";
81 		bus-width = <4>;
82 		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
88 		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
93 		pinctrl_sensor_power: sensor_power-0 {
98 		pinctrl_sensor_reset: sensor_reset-0 {
105 		pinctrl_board_mmc0: mmc0-board {
107 …<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deg…
112 		pinctrl_board_mmc1: mmc1-board {
114 …<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deg…
119 		pinctrl_board_usb2: usb2-board {
121 				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
127 	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
132 		spi-max-frequency = <50000000>;
142 	atmel,use-dma-rx;
143 	atmel,use-dma-tx;
148 	num-ports = <3>;
149 	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
161 	pinctrl-names = "default";
162 	pinctrl-0 = <&pinctrl_board_usb2>;
163 	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;