dts/microchip/at91-sama5d27_wlsom1_ek.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
9 /dts-v1/;
10 #include "at91-sama5d27_wlsom1.dtsi"
11 #include <dt-bindings/input/input.h>
15 …compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel…
26 		stdout-path = "serial0:115200n8";
29 	gpio-keys {
30 		compatible = "gpio-keys";
32 		pinctrl-names = "default";
33 		pinctrl-0 = <&pinctrl_key_gpio_default>;
35 		button-1 {
39 			wakeup-source;
44 		compatible = "gpio-leds";
45 		pinctrl-names = "default";
46 		pinctrl-0 = <&pinctrl_led_gpio_default>;
49 		led-red {
54 		led-green {
59 		led-blue {
62 			linux,default-trigger = "heartbeat";
68 	vddana-supply = <&vdd_3v3>;
69 	vref-supply = <&vdd_3v3>;
70 	pinctrl-names = "default";
71 	pinctrl-0 = <&pinctrl_adc_default>;
76 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
80 		pinctrl-0 = <&pinctrl_flx0_default>;
81 		pinctrl-names = "default";
82 		atmel,use-dma-rx;
83 		atmel,use-dma-tx;
92 		atmel,use-dma-rx;
93 		atmel,use-dma-tx;
115 		bias-disable;
121 		bias-disable;
126 		bias-pull-up;
133 		bias-pull-down;
143 			bias-disable;
151 			bias-disable;
158 		bias-disable;
164 		bias-disable;
170 		bias-disable;
175 		bias-disable;
180 		bias-disable;
185 	pinctrl-names = "default";
186 	pinctrl-0 = <&pinctrl_pwm0_default>;
199 	bus-width = <4>;
200 	pinctrl-names = "default";
201 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
206 	debounce-delay-us = <976>;
207 	atmel,wakeup-rtc-timer;
209 	input@0 {
216 		compatible = "atmel,tcb-timer";
221 		compatible = "atmel,tcb-timer";
227 	pinctrl-names = "default";
228 	pinctrl-0 = <&pinctrl_uart0_default>;
229 	atmel,use-dma-rx;
230 	atmel,use-dma-tx;
235 	pinctrl-names = "default";
236 	pinctrl-0 = <&pinctrl_uart3_default>;
237 	atmel,use-dma-rx;
238 	atmel,use-dma-tx;
243 	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
244 	pinctrl-names = "default";
245 	pinctrl-0 = <&pinctrl_usba_vbus>;
250 	num-ports = <3>;
251 	atmel,vbus-gpio = <0
255 	pinctrl-names = "default";
256 	pinctrl-0 = <&pinctrl_usb_default>;