dts/microchip/animeo_ip.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3  * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
5  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8 /dts-v1/;
13 	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
26 		stdout-path = &usart2;
35 			clock-frequency = <32768>;
39 			clock-frequency = <18432000>;
47 					compatible = "atmel,tcb-timer";
52 					compatible = "atmel,tcb-timer";
58 				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
59 				linux,rs485-enabled-at-boot-time;
64 				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
65 				linux,rs485-enabled-at-boot-time;
70 				pinctrl-0 = <&pinctrl_usart2>;
75 				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
76 				phy-mode = "mii";
81 				pinctrl-0 = <&pinctrl_mmc0_clk
84 				pinctrl-names = "default";
89 					bus-width = <4>;
101 			nand_controller: nand-controller {
103 				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
104 				pinctrl-names = "default";
108 					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
109 					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
110 					nand-bus-width = <8>;
111 					nand-ecc-mode = "soft";
112 					nand-on-flash-bbt;
116 						compatible = "fixed-partitions";
117 						#address-cells = <1>;
118 						#size-cells = <1>;
140 			num-ports = <2>;
141 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
147 		compatible = "gpio-leds";
151 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
152 			linux,default-trigger = "heartbeat";
157 			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
162 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
167 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
171 	gpio-keys {
172 		compatible = "gpio-keys";
174 		key-switch-in {
176 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
178 			wakeup-source;
181 		key-error-in {
183 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
185 			wakeup-source;
188 		key-s {
190 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
192 			wakeup-source;