dts/marvell/armada-370-mirabox.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5  * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include "armada-370.dtsi"
14 	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
17 		stdout-path = "serial0:115200n8";
30 		internal-regs {
35 				clock-frequency = <600000000>;
40 				compatible = "gpio-leds";
41 				pinctrl-names = "default";
42 				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
46 					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
47 					default-state = "keep";
52 					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
53 					default-state = "off";
58 					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
59 					default-state = "off";
64 				pinctrl-0 = <&ge0_rgmii_pins>;
65 				pinctrl-names = "default";
68 				phy-mode = "rgmii-id";
71 				pinctrl-0 = <&ge1_rgmii_pins>;
72 				pinctrl-names = "default";
75 				phy-mode = "rgmii-id";
83 				pinctrl-0 = <&sdio_pins3>;
84 				pinctrl-names = "default";
87 				 * No CD or WP GPIOs: SDIO interface used for
90 				 broken-cd;
103 				clock-frequency = <100000>;
106 					gpio-controller;
107 					#gpio-cells = <2>;
118 	/* Internal mini-PCIe connector */
132 	pinctrl-0 = <&mdio_pins>;
133 	pinctrl-names = "default";
134 	phy0: ethernet-phy@0 {
138 	phy1: ethernet-phy@1 {
144 	pwr_led_pin: pwr-led-pin {
149 	stat_led_pins: stat-led-pins {
160 		label = "pxa3xx_nand-0";
161 		nand-rb = <0>;
162 		marvell,nand-keep-config;
163 		nand-on-flash-bbt;
166 			compatible = "fixed-partitions";
167 			#address-cells = <1>;
168 			#size-cells = <1>;
171 				label = "U-Boot";