dts/marvell/armada-370-dlink-dns327l.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  * Device Tree file for D-Link DNS-327L
12 /dts-v1/;
14 #include <dt-bindings/input/input.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include "armada-370.dtsi"
19 	model = "D-Link DNS-327L";
22 		"marvell,armada-370-xp";
25 		stdout-path = &uart0;
38 		internal-regs {
40 				nr-ports = <2>;
50 	gpio-keys {
51 		compatible = "gpio-keys";
52 		pinctrl-0 = <
56 		pinctrl-names = "default";
58 		power-button {
59 			label = "Power Button";
64 		backup-button {
65 			label = "Backup Button";
70 		reset-button {
71 			label = "Reset Button";
77 	gpio-leds {
78 		compatible = "gpio-leds";
79 		pinctrl-0 = <
87 		pinctrl-names = "default";
89 		led-sata-r-amber {
90 			label = "dns327l:amber:sata-r";
92 			default-state = "keep";
95 		led-sata-l-amber {
96 			label = "dns327l:amber:sata-l";
98 			default-state = "keep";
101 		led-backup {
104 			default-state = "keep";
108 	usb_power: regulator-1 {
109 		compatible = "regulator-fixed";
110 		pinctrl-0 = <&xhci_pwr_pin>;
111 		pinctrl-names = "default";
112 		regulator-name = "USB3.0 Port Power";
113 		regulator-min-microvolt = <5000000>;
114 		regulator-max-microvolt = <5000000>;
115 		enable-active-high;
116 		regulator-boot-on;
117 		regulator-always-on;
121 	sata_r_power: regulator-2 {
122 		compatible = "regulator-fixed";
123 		pinctrl-0 = <&sata_r_pwr_pin>;
124 		pinctrl-names = "default";
125 		regulator-name = "SATA-R Power";
126 		regulator-min-microvolt = <5000000>;
127 		regulator-max-microvolt = <5000000>;
128 		startup-delay-us = <2000000>;
129 		enable-active-high;
130 		regulator-always-on;
131 		regulator-boot-on;
135 	sata_l_power: regulator-3 {
136 		compatible = "regulator-fixed";
137 		pinctrl-0 = <&sata_l_pwr_pin>;
138 		pinctrl-names = "default";
139 		regulator-name = "SATA-L Power";
140 		regulator-min-microvolt = <5000000>;
141 		regulator-max-microvolt = <5000000>;
142 		startup-delay-us = <4000000>;
143 		enable-active-high;
144 		regulator-always-on;
145 		regulator-boot-on;
165 	sata_l_white_pin: sata-l-white-pin {
170 	sata_r_white_pin: sata-r-white-pin {
175 	sata_r_amber_pin: sata-r-amber-pin {
180 	sata_l_amber_pin: sata-l-amber-pin {
185 	backup_led_pin: backup-led-pin {
190 	xhci_pwr_pin: xhci-pwr-pin {
195 	sata_r_pwr_pin: sata-r-pwr-pin {
200 	sata_l_pwr_pin: sata-l-pwr-pin {
205 	uart1_pins: uart1-pins {
210 	power_button_pin: power-button-pin {
215 	backup_button_pin: backup-button-pin {
220 	reset_button_pin: reset-button-pin {
233 	pinctrl-0 = <&uart1_pins>;
234 	pinctrl-names = "default";
239 	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
241 		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
248 	phy-mode = "rgmii-id";
253 	compatible = "marvell,mv64xxx-i2c";
254 	clock-frequency = <100000>;
263 		label = "pxa3xx_nand-0";
264 		nand-rb = <0>;
265 		marvell,nand-keep-config;
266 		nand-on-flash-bbt;
267 		nand-ecc-strength = <4>;
268 		nand-ecc-step-size = <512>;
271 			compatible = "fixed-partitions";
272 			#address-cells = <1>;
273 			#size-cells = <1>;
276 				label = "u-boot";
279 				read-only;
283 				label = "u-boot-env";
286 				read-only;
303 				label = "failsafe-uImage";
309 				label = "failsafe-fs";