Lines Matching +full:strobe +full:- +full:gpios
1 // SPDX-License-Identifier: ISC
5 * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
20 stdout-path = "uart0:115200n8";
28 compatible = "i2c-gpio";
29 sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
30 scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
31 #address-cells = <1>;
32 #size-cells = <0>;
36 * Philips PCF8582C-2T/03 512byte I2C EEPROM
43 read-only;
49 /* Flash memory defined per-variant */
50 nand-controller@3,0 {
61 /* Expansion bus set-up */
62 intel,ixp4xx-eb-t1 = <0>;
63 intel,ixp4xx-eb-t2 = <0>;
64 intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
65 intel,ixp4xx-eb-t4 = <0>;
66 intel,ixp4xx-eb-t5 = <0>;
67 intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
68 intel,ixp4xx-eb-byte-access-on-halfword = <0>;
69 intel,ixp4xx-eb-mux-address-and-data = <0>;
70 intel,ixp4xx-eb-ahb-split-transfers = <0>;
71 intel,ixp4xx-eb-write-enable = <1>;
72 intel,ixp4xx-eb-byte-access = <1>;
76 nand-on-flash-bbt;
77 nand-ecc-mode = "soft_bch";
78 nand-ecc-step-size = <512>;
79 nand-ecc-strength = <4>;
80 nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
85 compatible = "fixed-partitions";
86 #address-cells = <1>;
87 #size-cells = <1>;
109 #interrupt-cells = <1>;
110 interrupt-map-mask = <0xf800 0 0 7>;
111 interrupt-map =