dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts

1 // SPDX-License-Identifier: GPL-2.0
3 /dts-v1/;
5 #include "aspeed-g5.dtsi"
6 #include <dt-bindings/gpio/aspeed-gpio.h>
7 #include <dt-bindings/i2c/i2c.h>
8 #include <dt-bindings/leds/leds-pca955x.h>
12 	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
15 		stdout-path = &uart5;
23 	reserved-memory {
24 		#address-cells = <1>;
25 		#size-cells = <1>;
29 			no-map;
36 			compatible = "shared-dma-pool";
42 	    compatible = "gpio-leds";
47 			linux,default-trigger = "timer";
48 			led-pattern = <1000 1000>;
51 		front-fan {
52 			label = "front-fan";
56 	    front-psu {
57 			label = "front-psu";
61 	    front-syshot {
62 			label = "front-syshot";
66 		front-memory {
67 			label = "front-memory";
77 	iio-hwmon {
78 		compatible = "iio-hwmon";
79 		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
90 		m25p,fast-read;
92 		spi-max-frequency = <50000000>;
93 #include "openbmc-flash-layout.dtsi"
99 	pinctrl-names = "default";
100 	pinctrl-0 = <&pinctrl_spi1_default>;
103 		m25p,fast-read;
105 		spi-max-frequency = <100000000>;
120 	pinctrl-names = "default";
121 	pinctrl-0 = <&pinctrl_rmii1_default>;
124 	clock-names = "MACCLK", "RCLK";
125 	use-ncsi;
131 	pinctrl-names = "default";
132 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
137 	/* Enable GPIOE0 and GPIOE2 pass-through by default */
138 	pinctrl-names = "pass-through";
139 	pinctrl-0 = <&pinctrl_gpie0_default
141 	gpio-line-names =
142 	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
143 	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
146 	/*C0-C7*/	"","","","","","","","",
147 	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
149 	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
151 	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
154 	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
156 	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
158 	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
160 	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
162 	/*K0-K7*/	"","","","","","","","",
163 	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
164 	/*M0-M7*/	"","","","","","","","",
165 	/*N0-N7*/	"","","","","","","","",
166 	/*O0-O7*/	"","","","","","","","",
167 	/*P0-P7*/	"","","","","","","","",
168 	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
169 	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
172 	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
174 	/*T0-T7*/	"","","","","","","","",
175 	/*U0-U7*/	"","","","","","","","",
176 	/*V0-V7*/	"","","","","","","","",
177 	/*W0-W7*/	"","","","","","","","",
178 	/*X0-X7*/	"","","","","","","","",
179 	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
180 	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
182 	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
184 	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
185 	/*AC0-AC7*/	"","","","","","","","";
218 	i2c-mux@70 {
227 	i2c-mux@70 {
232 	i2c-mux@71 {
237 	i2c-mux@72 {
251 	i2c-mux@70 {
260 	i2c-mux@70 {
291 		#address-cells = <1>;
292 		#size-cells = <0>;
294 		gpio-controller;
295 		#gpio-cells = <2>;
336 		#address-cells = <1>;
337 		#size-cells = <0>;
339 		gpio-controller;
340 		#gpio-cells = <2>;
386 		#address-cells = <1>;
387 		#size-cells = <0>;
389 		gpio-controller;
390 		#gpio-cells = <2>;
436 		#address-cells = <1>;
437 		#size-cells = <0>;
439 		gpio-controller;
440 		#gpio-cells = <2>;
495 		#address-cells = <1>;
496 		#size-cells = <0>;
498 		gpio-controller;
499 		#gpio-cells = <2>;
545 		#address-cells = <1>;
546 		#size-cells = <0>;
548 		gpio-controller;
549 		#gpio-cells = <2>;
591 	power-supply@58 {
596 	power-supply@59 {
612 	pinctrl-names = "default";
613 	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
620 		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
625 		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
630 		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
635 		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
640 		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
645 		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
650 		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
655 		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
661 	aspeed,lpc-io-reg = <0xca2>;
666 	aspeed,lpc-io-reg = <0xca4>;
671 	pinctrl-names = "default";
672 	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
686 	memory-region = <&video_engine_memory>;