Lines Matching +full:flash +full:- +full:led +full:- +full:controller
23 #include <dt-bindings/interrupt-controller/irq.h>
24 #include <dt-bindings/gpio/gpio.h>
27 #address-cells = <1>;
28 #size-cells = <1>;
29 compatible = "arm,realview-eb";
48 vmmc: regulator-vmmc {
49 compatible = "regulator-fixed";
50 regulator-name = "vmmc";
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 regulator-boot-on;
56 xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
57 #clock-cells = <0>;
58 compatible = "fixed-clock";
59 clock-frequency = <24000000>;
62 timclk: clock-1000000 {
63 #clock-cells = <0>;
64 compatible = "fixed-factor-clock";
65 clock-div = <24>;
66 clock-mult = <1>;
71 pclk: clock-pclk {
72 #clock-cells = <0>;
73 compatible = "fixed-clock";
74 clock-frequency = <0>;
78 /* 2 * 32MiB NOR Flash memory */
79 compatible = "arm,versatile-flash", "cfi-flash";
81 bank-width = <4>;
83 compatible = "arm,arm-firmware-suite";
88 /* 2 * 32MiB NOR Flash memory */
89 compatible = "arm,versatile-flash", "cfi-flash";
91 bank-width = <4>;
93 compatible = "arm,arm-firmware-suite";
105 reg-io-width = <7>;
109 compatible = "nxp,usb-isp1761";
116 #address-cells = <1>;
117 #size-cells = <0>;
120 #address-cells = <1>;
121 #size-cells = <0>;
127 remote-endpoint = <&clcd_pads>;
135 remote-endpoint = <&vga_con_in>;
142 compatible = "vga-connector";
146 remote-endpoint = <&vga_bridge_out>;
153 #address-cells = <1>;
154 #size-cells = <1>;
155 compatible = "simple-bus";
159 compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
162 #address-cells = <1>;
163 #size-cells = <1>;
165 led@8,0 {
166 compatible = "register-bit-led";
171 linux,default-trigger = "heartbeat";
172 default-state = "on";
174 led@8,1 {
175 compatible = "register-bit-led";
180 linux,default-trigger = "mmc0";
181 default-state = "off";
183 led@8,2 {
184 compatible = "register-bit-led";
189 linux,default-trigger = "cpu0";
190 default-state = "off";
192 led@8,3 {
193 compatible = "register-bit-led";
198 default-state = "off";
200 led@8,4 {
201 compatible = "register-bit-led";
206 default-state = "off";
208 led@8,5 {
209 compatible = "register-bit-led";
214 default-state = "off";
216 led@8,6 {
217 compatible = "register-bit-led";
222 default-state = "off";
224 led@8,7 {
225 compatible = "register-bit-led";
230 default-state = "off";
232 oscclk0: clock-controller@c {
233 compatible = "arm,syscon-icst307";
235 #clock-cells = <0>;
236 lock-offset = <0x20>;
237 vco-offset = <0x0C>;
240 oscclk1: clock-controller@10 {
241 compatible = "arm,syscon-icst307";
243 #clock-cells = <0>;
244 lock-offset = <0x20>;
245 vco-offset = <0x10>;
248 oscclk2: clock-controller@14 {
249 compatible = "arm,syscon-icst307";
251 #clock-cells = <0>;
252 lock-offset = <0x20>;
253 vco-offset = <0x14>;
256 oscclk3: clock-controller@18 {
257 compatible = "arm,syscon-icst307";
259 #clock-cells = <0>;
260 lock-offset = <0x20>;
261 vco-offset = <0x18>;
264 oscclk4: clock-controller@1c {
265 compatible = "arm,syscon-icst307";
267 #clock-cells = <0>;
268 lock-offset = <0x20>;
269 vco-offset = <0x1c>;
275 #address-cells = <1>;
276 #size-cells = <0>;
277 compatible = "arm,versatile-i2c";
290 clock-names = "apb_pclk";
298 max-frequency = <500000>;
299 bus-width = <4>;
300 cap-sd-highspeed;
301 cap-mmc-highspeed;
303 clock-names = "mclk", "apb_pclk";
304 vmmc-supply = <&vmmc>;
305 cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
306 wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
313 clock-names = "KMIREFCLK", "apb_pclk";
320 clock-names = "KMIREFCLK", "apb_pclk";
324 compatible = "arm,versatile-lcd";
327 clock-names = "apb_pclk";
334 clock-names = "uartclk", "apb_pclk";
341 clock-names = "uartclk", "apb_pclk";
348 clock-names = "uartclk", "apb_pclk";
355 clock-names = "uartclk", "apb_pclk";
362 clock-names = "sspclk", "apb_pclk";
369 clock-names = "wdog_clk", "apb_pclk";
377 clock-names = "timer1", "timer2", "apb_pclk";
384 clock-names = "timer1", "timer2", "apb_pclk";
390 gpio-controller;
391 #gpio-cells = <2>;
392 interrupt-controller;
393 #interrupt-cells = <2>;
395 clock-names = "apb_pclk";
401 gpio-controller;
402 #gpio-cells = <2>;
403 interrupt-controller;
404 #interrupt-cells = <2>;
406 clock-names = "apb_pclk";
412 gpio-controller;
413 #gpio-cells = <2>;
414 interrupt-controller;
415 #interrupt-cells = <2>;
417 clock-names = "apb_pclk";
424 clock-names = "apb_pclk";
430 interrupt-names = "combined";
432 clock-names = "clcdclk", "apb_pclk";
434 max-memory-bandwidth = <95000000>;
438 remote-endpoint = <&vga_bridge_in>;
439 arm,pl11x,tft-r0g0b0-pads = <0 8 16>;