dts/allwinner/sunxi-libretech-all-h3-it.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
14 		stdout-path = "serial0:115200n8";
18 		compatible = "hdmi-connector";
23 				remote-endpoint = <&hdmi_out_con>;
29 		compatible = "gpio-leds";
38 		compatible = "regulator-fixed";
39 		regulator-name = "vcc3v3";
40 		regulator-min-microvolt = <3300000>;
41 		regulator-max-microvolt = <3300000>;
42 		regulator-always-on;
43 		regulator-boot-on;
44 		vin-supply = <&reg_vcc5v0>;
49 		compatible = "regulator-fixed";
50 		regulator-name = "vcc5v0";
51 		regulator-min-microvolt = <5000000>;
52 		regulator-max-microvolt = <5000000>;
53 		regulator-always-on;
54 		regulator-boot-on;
57 	reg_vcc_dram: vcc-dram {
58 		compatible = "regulator-fixed";
59 		regulator-name = "vcc-dram";
60 		regulator-min-microvolt = <1500000>;
61 		regulator-max-microvolt = <1500000>;
62 		regulator-always-on;
63 		regulator-boot-on;
64 		vin-supply = <&reg_vcc5v0>;
66 		enable-active-high;
69 	reg_vcc_io: vcc-io {
70 		compatible = "regulator-fixed";
71 		regulator-name = "vcc-io";
73 		regulator-always-on;
74 		regulator-boot-on;
75 		vin-supply = <&reg_vcc3v3>;
79 	reg_vcc_usbwifi: vcc-usbwifi {
80 		compatible = "regulator-fixed";
81 		regulator-name = "vcc-usbwifi";
82 		regulator-min-microvolt = <3300000>;
83 		regulator-max-microvolt = <3300000>;
84 		vin-supply = <&reg_vcc5v0>;
86 		enable-active-high;
89 	reg_vdd_cpux: vdd-cpux {
90 		compatible = "regulator-fixed";
91 		regulator-name = "vdd-cpux";
92 		regulator-min-microvolt = <1100000>;
93 		regulator-max-microvolt = <1100000>;
94 		regulator-always-on;
95 		regulator-boot-on;
96 		vin-supply = <&reg_vcc5v0>;
98 		enable-active-high;
103 	cpu-supply = <&reg_vdd_cpux>;
107 	cpu-supply = <&reg_vdd_cpux>;
111 	cpu-supply = <&reg_vdd_cpux>;
115 	cpu-supply = <&reg_vdd_cpux>;
132 		remote-endpoint = <&hdmi_con_in>;
137 	vmmc-supply = <&reg_vcc_io>;
138 	bus-width = <4>;
139 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
144 	vcc-pa-supply = <&reg_vcc_io>;
145 	vcc-pc-supply = <&reg_vcc_io>;
146 	vcc-pd-supply = <&reg_vcc_io>;
147 	vcc-pe-supply = <&reg_vcc_io>;
148 	vcc-pf-supply = <&reg_vcc_io>;
149 	vcc-pg-supply = <&reg_vcc_io>;
153 	vcc-pl-supply = <&reg_vcc3v3>;
160 		compatible = "jedec,spi-nor";
162 		spi-max-frequency = <50000000>;
167 	pinctrl-names = "default";
168 	pinctrl-0 = <&uart0_pa_pins>;
178 	usb1_vbus-supply = <&reg_vcc_usbwifi>;